China Movable Partition Walls Frameless Glass Partition

General DescriptionTop hung to ceiling system, the single toughened glass is clipped on top and bottom.Glass panel can be fixed on the ground by floor pin. No track on the floor. frameworkA pre-finished 100mm length aluminium clip on top and bottom Partitions Panel6mm+53+6mm toughened glassGlass TolerancesToughened glass cannot be supplied completely flat. The maximum permitteddeviation from a straight line is 0.30% (3mm per metre run) measured across full pane of glass on the concave surface and in the vertical plane and supported at all four edges. 3mm-5mm vertical edge tolerance to frameless glass doors assuming a flat and level floor and ceiling.This tolerance may be increased subject to prevailing site conditions.Panel JointClear dry pvc joint.ManifestationA wide range of film manifestation and screen printing available as optional extra.Module700mm - 1200mm maximum.HeightUp to 3000mmThickness25mm overallWeightApproximately 25.00Kg/m2 for 10mm glass and 30.00Kg/m2 for 12mm glass.FinishesSatin anodised or polyester powder coating to all exposed aluminium components available in a wide range of colours as standard.Door FurnitureSatin stainless steel handle and hinge. Additional finishes and levers available as optional extraAcoustic PerformanceA glass module with 10mm glass can achieve up to 32 Rw db,A glass module with 12mm glass will achieve up to 33 Rw db