China Mud Pump Triplex Mud Pump Piston Mud Pump

Specifications
PN Horizontal Mud Pump
Calibre (mm): 50-200
Capacity (m3/h): 7.2-1600
Head (m): 12-90
General descriptionPN-type mud pump is single stage, single suction, and horizontal centrifugal slurry pump.
PN-type slurry pump (PNL-type slurry pump) can be vertical or inclined to use, small fCapacitor ootprint, be buried in the working medium scroll work, easy mud pump parts to start, without water, from the direction of motor rotation is a clockwise direction to see the work of the tail.
Application
· PN-type slurry pump (PNL-type slurry pump) is mainly used for river mud, feces, river water, sending smoke poured slurry feed, but also for easy movement of fire pump.
· Can also be used for municipal, chemical, printing and dyeing, pharmaceutical, foundry, food and other industries pumping thick fluids, foul liquid, pasty body, stream flow of sand and urban river sludge.
· PN -type mud pump (PNL-type slurry pump) also can be used to exclude containing mud and small gravel fluid.
Features
1 The pump flow passage component adopted with wear-resistant alloy material.
2 The space between the impeller and back plate can be adjusted in time to maintain its effectiveness.
3 The impeller adopts screw joint for the discharge diameter is below 6-inch, for the pumps with the discharge diameter above 8-inch use key joint.
4 Shaft seal use packing seal; Seal water with the working pressure is higher than 1kg/cm2 should be injected while working.
5 The pump has simple structure, reliaSpraying Machinery & Spreading Equipment ble operation, easy maintenance, long service life etc. Characters. It is suitable to transport liquid and solid in mine.
TYPE NOTATIonSuch as: 2PN
· 2-Suction diameter is divided by25 (that is, the outlet diameter is 50mm)
· P-- Trash pump
·Paper Machinery N - Mud
Parameters
· Calibre (mm): 50-200
· Capacity (m3/h): 7.2-1600
· Head (m): 12-90
PN Series Mud PumpPN mud pumps features long wPharmaceutical Equipment & Machinery orking life, simple construction, reliable operation, which can be used to handle the mixture of particles and sands in mining industPower Transmission & Transformer ry. The slurry density rate shall be lower than 60 %( as weight).Flow Range: 30~151m³ /h
Head Range: 15~26m
Motor Power: 11~22kwModelflow(m3/hhead(m)speed(rpm)power(kw)weight(kg)inlet(mmoutlet(mm)1PN7.2
12
1614
13
12 1430 3120 50 252PN30
47
58 22
19
17 1450 11 150 96 502PNL30
47
5822
19
17 1450 11 250 63 533PN54
108
151 26
21
15 1470 22 450 125 753PNL54
108
15126
21
16 1470 22 280 90 854PN100
150
200 41
39
37 1470 55 1000 150 1004PN(1) 41.5
80
111 51
50
49 1470 55 1000 150 1004PN(1) 52
100
138 51
50
49 1480 75 1000 150 100 6PN 230
280
320 27
26
25 980 75 1200 200 150 8PN 450
550
600 65
63
62 980 215 4000 200 200 10PN 768
1030
1290 91.8
88
85 980 780 4600 250 250