China Multi-Core General Rubber Flexible Mine Cable

Multi-Core General Rubber Flexible Mine Cable (3-6+1-6)
Multi-core CU AL AAAC General Rubber Sheath Flexible Cable 16mm2 25mm2 35mm2 50mm2 70mm2 95mm2

Application of welding cable

Welding Cables are flame retardant, oil resistant, resilient, resists compression cuts and abrasion,
durable, and survives rough handling. Designed for use as arc welding leads from the secondary side of the power
source, typical of welders and welding generators. Not for primary voltage.

Construction of welding cable

Welding Cables are manufactured using annealed rope-stranded bare copper conductor as per ICEA
S-75-381. A paper tape separates the conductor insulation. A medium-duty EPR jacket is extruded onto the
cable. EP or Hypalon jackets are available. 600 volt spark tested.

Standard of welding cable

ASTM B-3 ASTM B1732, ICEA S-175-381, IEC 254-1.

Specification of welding cable

Medium Duty jacket made accordance with ICEA S-75-381 - Portable and Power Feeder Cables for Use in
Mines and Similar Locations or IEC 245-1
600 Volt Spark tested

Technical data of welding cable

Conductor Nominal Section (mm2)
Conductive Core
Thickness of Section Sheath (mm)
Average Outer Diameter (mm2)
200C Conductor Resistance≤(Ω/km)
Number/Diameter of Core(mm)
Min
Max
10
322/0.20
1.8
7.5
9.7
1.91
16
513/0.20
2.0
9.2
11.5
1.16
25
798/0.20
2.0
10.5
13.0
0.758
35
1121/0.20
2.0
11.5
14.5
0.536
50
1596/0.20
2.2
13.5
17.0
0.379
70
2214/0.20
2.4
15.0
19.5
0.268
95
2997/0.20
2.6
17.0
22.0
0.198
120
1702/0.30
2.8
19.0
24.0
0.161
150
2135/0.30
3.0
21.0
27.0
0.129
185
1443/0.40
3.2
22.0
29.0
0.106