China Multi-Parameters Drilling Instruments System

IDS2000 MULTI-PARAMETER DRILLING INSTRUMENTATION SYSTEM

1. Application Areas:

IDS2000 Multi-parameter Drilling Instrumentation System is co-manufactured by American Petron Inc. and Hubei Jianghan Petroleum Instrument & Meter Co., Ltd. It is mainly used to acquire, process and display variations of different engineering parameters during drilling process as hook load, weight on bit, rotary torque, top drive torque, top RPM, standpipe pressure, tong torque , Rotary RPM, Pump SPM1#~3#, mud return flow , mud pit 1#~8# volume, trip tank volume, total SPM, inlet mud volume, total mud pit volume, content of total hydrocarbon and H2S, height of traveling block, well depth, bit location, bit time, ton-mile, ROP and other parameters. All the parameters are acquired, calibrated, displayed and alarmed via IDS2000, and then the data are transmitted to remote computer in thetoolpusher's office for display, record, storage and print. It can help drilles to judge operation situation of drilling rigs, and the information can be used fordrilling optimization, trouble judging and shooting at well site, and stored as history data.

2. Features

1 .Stable, reliable and advanced;

2. Acomplete set of drilling parameters can be chosen and combined freely;

3. A password is required when changing computed engineering values of all parameters, thus mistaken changes can be avoided;

4. Engineer units of parameters can be selected between metric and imperial units;

5. Equipped with special cable that is corrosion-resistant, oil-proof, waterproof, fire- resistant, low temperature resistant and salt-fog resistant, and sealed, water-proof and explosion-proof connectors are used;

6.Explosive-proof performance of the whole system is reliable;
7.System features modularized structure and convenient maintenance 8.Core of the system: DAQ and display unit (IDS2000) and necessary software, communication box and key sensors are all imported from USA Petron Inc. and other countries so that the system is of advanced technology, high performance and reliability
3. Specifications:

I ParametersMeasuring rangeAccuracyHookload0~10080kN±2%F_SRotary torque0~40kN • m
(Display mode; 0~500scale)± 5%F_STong torque0~100kN (in tailline pull)± 2_5%F.SMud pressure0~40MPa±1_5%F.SDepth0-9999.9m RPM0~300r/min SPM of Pump 1,2 and 30~300storkes/min Mud flow0-100%± 2%F_SMud density0.8-2.0g/cm3±0_02g/cm3Total gas0~100%LEL (lower limit explosive concentration)±5%LELF.SH2S0~1OOppm±5% F.SWorking temperature-30~70°C Mud pit volume0-999.9m3 (for Eight mud pits) Power Supply220VAC±10%, 47~63Hz