China Multi-Purpose Ozone Generator Air Purifer with Water Treatment Machine Ozonizer 1g H

Special Features15-minute to 4-hour adjustable timerStainless steel handle for easy portabilityOptional oxygen feed hook upInternal air compressorHow it WorksPlug your power cord into the back of the unit and the wall socket.Remove the bulkhead nut on O³ out port.Then insert the bulkhead onto the tubing.Screw the nut back onto the O³ out port.Attach the diffuser stone of your choosing to the opposite end of the tubing.

For Oxygen Air:

Disconnect the small tubing from the O² in port.Connect the oxygen source to the O² in port with appropriate tubing.Adjust the flow rate of the oxygen source to:For the MP-1000, a maximum of 1-3 L/minute.For MP-3000, MP-5000 and MP-8000 a maximum of 2-4 L/minute or PSI 5.

For Ambient Air:

Turn on both air compressor switch and the ozone switch, in that order.Keep in mind, the unit will NOT power up until the timer is set.Turn the power button on - it is located on the back of the unit by the power cord.Turn the ozone concentration knob to 100 percent or the desired concentration for the given application.

Set the unit timer for the desired application duration.

Please note: Use a degasifier and an ozone destructor to ensure proper ozone dissapation.

Please Note: Operate with good ventilation. In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.

Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.

Technical SpecificationsMP-1000: 10.7x.6x9 inches, 8.5 lbsMP-3000: 8x12x10 inches, 13 lbsMP-5000: 8x15x10 inches, 15 lbsMP-8000: 9.8x15x10 inches, 18 lbs
Tenology
Parts IncludedMP-1000 ozone generatorMP-1000 Operation Manual8 feet of flexible polyurethane tubing8 feet PTFE tubingTwo 2" oblong diffuser stones Spare fuseFan filter replacement