China Multipurpose Flexible Joint Sealing PU Construction Windshield Adhesive Sealant

DEscriptION
Surtek 3356 is a one component, moisture-curable solvent free polyurethane adhesive sealant. It is non-sag, fast cure, of high bonding strength with primer. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.
ADVANTAGES
1, Bonds and seals at the same time.
2, Short tack free and curing time.
3, Very high thixotropy for good gap-filling properties.
4, Very good Adhesion to a wide range of substrates.
5, Non-staining curing process. Solvent free, no odor.
6, Non-corrosive.No sagging
7, Inital load bearing capacity.
8, Overpaintabiliity for most coatings.
9, Increases torsional stiffness of final assembly.
10, Shock/Impact resistant.
11, Vibration and sound damping properties.
USES
Surtek 3356 is used for windshield bonding, bus body bonding, and other high-strength request bonding and gap filling.
PROCESS
Cleaning:
Clean surface with a strong jet of compressed air, sandblast, or solvent to ensure the surface being clean, dry, free of oil, grease, and of sound quality.
Application of sealant:
Cut tip to desired shape and size. A triangular shaped notch will provide the desired bead shape and height. Puncture airtight seal. Install with hand or power operated gun and extrude the sealant. A height of 1/2 to 9/16 inch and a 1/4 -5/16 inch base is suggested. Put the glass in place within 15 minutes.
PACKAGING
310ml cartridge
Flexible Package: 400ml sausage, 600ml sausage
Drum: 200L drum
STORAGE AND SHELF LIFE
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months (cartridge), 6 months (sausage and drum).
The shelf life of polyurethane sealant is related to the temperature and humidity of the environment. The recommended storage temperature is 5-25° C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30° C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well. In the long-time high temperature and high humidity storage environment, the product is easy to get viscous, extrusion will be deteriorated and shelf life will be shortened.

AppearanceUniform PasteColorBlackDensity1.25 ± 0.05 kg/lCure mechanismMoisture-curingTack-free time*15~35 minRate of cure*~3 mm per 24 hrsShore A hardness60±5Tensile strength≥6.0 N/mm 2Elongation at break≥300%Tear strength≥10 N/mmTensile-shear strength (with primer≥4.0 N/ mm 2Glass transition temperature-45°C, approx.Service temperature (continuous)
Short - term (up to 48 hrs)-40°C to +90°C
130°C