China Multispan Film China Green House with Irrigation Hydroponic System

multispan film China green house with irrigation hydroponic system
Agriculture China tomato greenhouse is also called plastic greenhouse ,often use circular arch , single span or multi-span. The greenhouse frame can use steel structure,bamboo and wood,or cement column,etc.The film greenhouse is often used for agricultural growing,for example vegetables,fruit,flower etc.It is the most economical way of planting for farmers.
the advantage of the greenhouse
1).low cost,quick effect
2).high light transmission,good for crop growth
3).can grow anti-season vegetables,high efficiency
4).can prevent the rain damage to the crops
5).easy construction,low technical requirements

Weifang Jianda Greenhouse material Co,.Ltd is located in qingzhou city,Shandong province,China. Our company is large agricultural greenhouse group. Our products including greenhouse framework,hollow glass, float glass or PC sheet, outside shading system, inside shading System, cooling system, heating system,ventilation system, mobile seedbed system, electric control system, etc.
Agriculture China tomato greenhouse widely application for
planting vegetable, like tomato,lettuce,fruits like strawberry , fish farming ,and more.
1) Economical greenhouse,beautiful arc and low cost are popular with users.
2) The arc-shaped roof is beautiful and easy to see.
3) The structure is small with steel and good insulation performance.
4) High utilization of land to increase crop yield.
5) It's convenience for centralized management.
1. Film GREEN HOUSE for JDWS brand INTRODUCTION
The skeleton materials of the greenhouse is made by galvanized steel materials,
connected by galvanized and anti-rot bolts and screws, no welded point. And the
Greenhouse can be used for exhibition, seed-breeding, flower or vegetable
market or mall, ecological restaurant, teaching or scientific research, etc.

ItemSpan StructureCoveringWidth(m)8m,customizedMain Pillar: 50*100*2.0mm
Auxiliary pillar:50*50*2.0mm
Arch pipe: Φ32/Φ25 for choose
150 microns, 200microns or customizedLength (m)customized Distance between Bays4m Shoulder height3m/4m/5m Top Height4.8/5.8m/6.8m Wind load0.35-0.5kn/m2Snow load0.25-0.4kn/m2Rainfall140mm/hOptionalSide ventilation, irrigation system, heating system, cooling system, shading systemApplicationStrawberry, watermelon, cucumber, tomato, vegetables, flower, medical crops, poultry farming

multi span film GREENHOUSE SUPPORTING SYSTEM
Outside Shading System, Inside Shading System, Cooling System, Heating System, Ventilation System, Seedbed System, Etc.

1Steel StructureHot-galvanized steel pipeYes2Greenhouse filmDiffirent thickness to choosechoose according to
the clients requirements3Insect netHigh quality polyrthylene as raw materialchoose according to
the clients requirements4Sun-shading netSummer shade,block rain,moisture,cooling,winter spring heat preservationchoose according to
the clients requirements5cooling systemIt consists of cooling fans and cooling padchoose according to
the clients requirements6heating systemHot water heating,hot air heating,electric heatingchoose according to
the clients requirements7ventilation systemSide windows and cooling fanschoose according to
the clients requirements8Drip irrigation systemcustomized according the greenhouse length and widthchoose according to
the clients requirements9Micro-sprinkler systemcustomized according the greenhouse length and widthchoose according to
the clients requirements10Fill in lightEasy assemble auto light deprivation blackout greenhousechoose according to
the clients requirements11Seedling bedMovable seeding bedchoose according to
the clients requirements12hydroponicsIt can be reused, no need to add nutrientschoose according to
the clients requirements13External&internal shading systemThe gear rack drives the shading system.choose according to
the clients requirements14Film-rolling systemElectronic type,chain type,manual typechoose according to
the clients requirements

A..multi span green house Outside Shading System, Inside Shading System.
Internal shading:Setting internal shading is an effective way to save energy, shade, temperature and humidity.The unique advantage of the shading curtain is that it will reflect the sun rather than absorb sunlight, effectively reduce the greenhouse light, while reducing the temperature of crops and air.Unique thermal radiation barrier materials outside greenhouse emission, can keep the curtain under the heat is not lost.Close the sunshade curtain will increase the humidity indoor temperature rapidly.At the same time, sunshade of lower surface heat radiation transmitted from the greenhouse has good absorption ability, the curtain can maintain high temperature.High temperature curtain can prevent condensation, to avoid the condensed water surface under the curtain.
Outside shading:In summer, the solar radiation heat load is too high,when the external shading system is used, the indoor temperature can be controlled to be only 1ºChigher than that of the outdoor room in a well ventilated greenhouse due to the blocking of most of the solar radiation into the greenhouse.If combined with wet curtain fan system, can create an ideal temperature and humidity environment, reduce greenhouse operation costs, saving energy consumption.
B:.multi span green house Cooling System, Heating System, Ventilation System
C:.multi span film green house Seedbed SystemSeedbed system of greenhouse includes fixed seedbed and mobile seedned. The fixed seedbed is single-layer, angel steel as the support, steel wire mesh set on the surface. The support of mobile seedbed is made by galvanized steel tubes, outline of the seedbed aluminum-alloy material. The surface of the mesh applies the anti-corrosive treatment by the cladding layer. The seedbed system can promote the utilization rate effectively of the greenhouse, usually up to about 85%
D:film green house power distribution systemControl System of greenhouse is a kind of environmental automatic control system that is designed for the agricultural greenhouse, agriculture environmental control and weather observation, able to measure a lot of agricultural factors such as direction and speed of wind, temperature and humidity of air or soil, air pressure, rainfall, solar radiant quantity and ultraviolet intensity, etc. It can control the facilities of ventilation system, shading system, cooling system, illumination supplement, irrigation and fertilization, adjusting the inner environment of the greenhouse to the most suitable conditions.
3.OUR FACTORY
We are one of leader of greenhouse manufacture, can make all kinds of greenhouse parts.
We are majoring on the greenhouse materials manufacture, sales and technical services. We are engaging in the advanced greenhouse projects and designing. More and more companies have built up cooperation with our company based on the advantages of the quality and price of our products.
Our operation principle is "Continuous Creation of Value for Our Clients". We are making persistent efforts based on the demands from our clients, and promoting quality of the products and reducing the costs continuously, so as to supply products of high performances cost ratio.
4. CUSTOMERS VISITING
Our customers from over the world, we always provide the best greenhouse solutions for our customers in last 10 years.
5.PACKAGING &SHIPMENT
Delivery on time to meet customer requirments is our factory culture.
6.Greenhouse Accessories
Our factory manufacture greenhouse and provide the greenhouse accessories and equipments to the customers

7.FAQ how to complete order
The main body of Agriculture China tomato greenhouse is simple and practical. Its cost is low and operation cost is low. It is suitable for the north area. Double arch and double film is adopted for the top so that it can prevent heat loss and cold air invasion effectively. Furthermore, its insulation effect is good and operation cost in winter is low. Polycarbonate plate, float glass and film (single layer, double layer) can be selected as covering of the periphery.
Plastic shed is widely used in protected horticulture field. It is economic and practical. Furthermore, its construction cost is low.
1. How long is the delivery time?
The delivery time is from 10days to 60 days after getting deposit. It depends on the size of greenhouse.
2. How long is the warranty period?
We will supply free spare parts if any problem occurred in 12 months after installations.
3. Is your company foreign trade company or manufacturer?
We are manufacturer.
4. Can you supply sample?
Small parts can be supplied, but clients should pay the express fee.
5. Can your company supply greenhouse design?
Our company can give greenhouse design according to your land and plant after getting deposit. And we can give simple drawing before signing contract.
6. How to install greenhouse?
We will send our engineers to clients's site for guiding the installations.
Client should hire enough local workers for doing the installation work.
7. When installing, what cost should we pay?
Our engineers' airline tickets, local accommodations, visa fees, etc are taken by the clients.
Our engineers' salary is $100 /day per person.
8. What is the payment terms?
Generally, our payment way is 30%-50% TT deposit, the balance by TT before loading.
Or you can give your own payment term, then we can negotiate it.