China Must Ep3000 1kw-6kw Pure Sine Wave AC to DC 240V 48V Power Inverter

MUST EP3000 1KW-6KW pure sine wave ac to dc 240v 48v power inverter
Applied in the field of industrial process controls, battery charging requirements, personal computers, telecommunications, graphics displays, plating and gold recovery industries and wherever required in the commercial, telecoms, mining or industrial markets. Commercial Solar, Recreational Vehicles, Mobile Office, Industrial Wind, Boats, Truck, & RV Residential Solar, Emergency Vehicles, Residential Wind, Fleet & Utility Vehicles, Camping & Outdoors, Renewable Newsletter,
Soft start capability for starting heavy loads
New power factor corrected (PFC) charging
Available in 1000 and 3000 watt models Utility grade, sine wave power
Durable construction for long life under extreme environmental conditions
70 AMP automatic three-stage battery charger (bulk, absorption, and float)
Battery equalization with remote temperature sensor for increased performance
Low idle current (less than 1 watt) conserves energy when no loads are present
Built-in starting control circuits for two- and three-wire generator starting systems
New digital display shows kilowatts (kW) when inverting and AMPS (A) when charging Better thermal performance allows full output power to 50° C (122° F) without de-rating High surge capacity starts more difficult loads and handles overload conditions reliably Simplified controls with a snap-on cover that protects settings from being accidentally changed

MODEL115V Models230V ModelsOUTPUTPower Levels crated at nominal inputs1KW;2KW;3KW;4KW1KW;2KW;3KW;4KW;5KW;6KWOutput Voltage110V/115V/120V Selectable220V/230V/240V SelectableVoltage WaveformPure Sine waveCrest Factor3:'1Output FrequencyAuto Select for 50/60Hz,47Hz ~55Hz for 50Hz nominal,56Hz ~ 65Hz for 60Hz nominal(Synchronized to Mains)Regulation (Nominal)±20% typical of nominal voltageRegulation±3% of selected output voltage (adjustable with the(Battery mode)remote set-up software)Transfer timeBlackout 3ms typical,Brownout 1ms typical,Battery mode to Normal mode:1ms typicalOver current protectionOver load alarm level 100% ~ 120%Over load shutdown level 120% ~ 190%(Adjustable by using the remote set-up software)INPUT Nominal Voltage110V/115V/120V Selectable220V/230V/240V SelectableInput Frequency47Hz ~ 65Hz, 50/60Hz auto-sensingEfficiency (Normal mode)99%Noise FilteringFull time EMI/RFI filteringOver current protectionRe-settable over current protector:1000W~4KWAC Fuse1000VA/2000VA,Re-settable over current protector:1000W~6KWVoltage Range85V ~ 145V185V ~ 265VAVR Range
(2 Bucks, 2 Boosts)Enhanced Buck: +28% of selected nominal voltageBuck mode: +10% of selected nominal voltageBoost mode: -10% of selected nominal voltageEnhanced Boost: -25% of selected nominal voltageSurge Protection1KW/ 2KW:416 Joules1KW-3KW:430 Joules3KW ~ 4KW:724 Joules4KW-6KW:826 JoulesBATTERY Battery typeLead-Acid 50Ah~500Ah (Recommended)Lead-Acid 50Ah~500Ah (Recommended)DC Voltage1KW/2KW:12Vdc1KW/2KW/3KW:12Vdc2KW/3KW:24Vdc2KW/3KW:24Vdc3KW/4KW:48Vdc3KW/4KW/5KW/6KW:48VdcTypical backup timeNo LimitCharging methodSmart pulse charging with two charging modes?EQuick charging when batteryis not fully charged, trickle charging when battery is 90% fully charged.Maximum charging current1000W 12V:35A1000W 24V:35A2000W 12V:65A2000W 24V:35A3000W 24V:45A4000W 48V:35A5000W 48V:40A6000W 48V:50AAverage chargingQuick charging mode:15.7V-54V maximum.voltage for each batteryTrickle charging mode:13.5V -52V(adjustable with the remote set-up software)ProtectionOver current protection & Over charging voltage protection (SCR control)Thermal protection (CPU control)When temperature inside the unit is over 45°C ,charger will stop charging for 2 minutes followed by an 2 minutes charging. The cycle will be repeateMonitoringSmart monitoring & warning for failed battery or open-circuit battery.Auto-detection each time when power on or every 6 days.SOLAR CHARGER Rating voltage12V / 24V / 48V12V / 24V / 48VDC input range12V model : 12 ~ 21Vdc;24V model : 24 ~ 42Vdc;48V model : 48 ~ 84VdcCharging methodConstant voltage with current limiting by PWM controlCharging voltage12V model:13.5Vdc;24V model: 27.0Vdc;48V model: 54.0VdcPower rating12V model : 1000W/2000W (13.5Vdc @ 37A)24V model : 1000W/2000W (27.0Vdc @ 37A)48V model : 3KW/5KW/6KW (54Vdc @ 18.5A)ProtectionDC input polarity protection, DC input short circuit protection( when battery isconnected), DC output over current protectionCOMMUNICATIONS & MANAGEMENTStandard Interface portUPSilon2000 compatible; optional for RS232 .Optional Interface partRJ45 (Surge protection), DB9Control panelLCD or LED SelectableAudible alarmAlarm on battery:Low battery & Battery over voltageAlarm on abnormal operation:Over load, Short-circuit, & Over heatGreen mode function1% to 14% of full load (adjustable by using the remote set-up software)(Auto-shut-off in blackout)The default setting is OFF.Cooling fan controlAuto on / off, controlled by temperature & operation modeENVORMENT AND SAFETYOperating TemperatureUp to 1500 meters:0°C to 40°C (32°Fto 104°F)Transit/storage Temp.-15°C to 55(5°F to 131°F)Relative Humidity5 - 95% non condensingOperating Altitude0 ~ 3000 metersQuality control systemISO 9001:2000, ISO 14002-2004PHYSICAL AppearanceSize(mm)LxWxH570*315*300Weight(Kg)1000W/18.2kg ;2000W/19.5kg ;3000W/23.5kgSize(mm)LxWxH755*319*288Weight(Kg)4000W/35kg ;5000W/38kg ;6000W/40kg