China Must New Design MPPT PV1600A Solar Charge Controller

Must New Design MPPT PV1600A Solar Charge Controller, 12V/24V Auto Work
Must Power Limited was established in 1998, with the headquarter in Hong Kong, which is a professional Hi-tech enterprise specializes in the research, development and manufacturing of Uninterruptible Power Supply (UPS), power inverter, solar power inverter.
Our comprehensive product lines include: Offline UPS, line interactive UPS, online UPS, power inverter, solar inverter, solar controller. Most products with CE, SonCAP certificate and IS9001 quality certificate. We are one of the authorized suppliers for China Government.
Must power with an excellent R & D team formed by over 30 engineers, and together 10, 000 square meter in-house manufacturing facilities in Shenzhen city, Guangdong, China.
Our main markets are Africa, Middle East as Ukraine, Italy, Kenya, South Africa, Nigeria, Pakistan etc.
MUST POWER
PC1600 Series 20-60A 12V/24V/48V MPPT Solar Charge Controller
Support a wide variety of system designs
Must PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.
PV system designers met the challenge of delivering both grid-tied savings during normal times and off-grid independence during emergencies with 1-phase arrays of Must IPV3000W/IPV5000W inverter/chargers powering your house. This system saved money on utility bills, supply essential power during emergencies (all with one versatile system).
Features:
· 45A/60A MPPT solar charge controller
· 24V/48V auto work
· PV Output: 70V-145V
· Several seconds tracking speed
· High Tracking efficiency of 99%
· Multiphase synchronous rectification technology
· Peak conversion efficiency of 98%
· DSP processors architecture ensures high speed and performance
· Multifunction LCD displays system data and status
· Four stages charging optimizes battery performance
Electronic Protections:
· PV array short circuit
· PV over current
· PV over voltage
· PV reverse polarity
· Battery reverse polarity
· Over charging
· Overheating protection
A charge controller's main job is to optimize a PV array's output which can fluctuate based on shading and temperature variables found on the average roof.
Must™ PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.
The innovative PC1600 MPPT software algorithm is both continuous and active, increasing photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both PC1600 Charge Controllers can operate at their full maximum current rating, 40 AMPS or 60 AMPS respectively, in ambient temperatures as high as 113° F (45° C).
PC1600 Charge Controllers incorporate the features developed by Must™ , including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built in, backlit 70-character display shows the current status and set the key parameter at the touch of a button.
------------------------------------------------------------------------------------------
Contact:
Miss Melon
Mobile: 0086 18824651423

ModelPC16-4515FPC16-6015FDefault Battery system Voltage24v/48vdc(adjustable)Charge InputPV Open Circuit Voltage rangeOperational max=145VDC temperature correct VOCMax PV input power(24v)1200W1600WMax PV input power(48v)2400W3200WBattery voltageNominal Voltage24V / 48VAbsorption Voltage27.0V / 54.0VRefloat Voltage27.4V / 54.8VFloat Voltage28.6V / 57.2VLow voltage protection point21.0V / 42.0VDC OutputOutput Voltage22.0-28.6V / 44V-57.2VRated Current45A continuous @40 ambient60A continuous @40 ambientWarning for low voltage23.0V / 46.0VCut off for low voltage21.6V / 43.0VLow voltage recovery26.0V / 46.0VDisplayLED indicationSystematic operation, LV indication, LV protection, over charge protection, loads protection, short circuit protectionLCD display(optional)Charge voltage, charge current, voltage of storage battery, capacity of storage battery, output currentAlarm Protections1.PV array short circuit protection, PV reverse polarity protection 2.Battery reverse polarity protection , Over charging protection 3.Output short circuit protection 4.Low voltage protection for storage batteryGeneral specificationProtection LevelIn compliance with regulations of DIN EN60529 and standards of IP22Charge modePWM ,constant current_constant voltage, function of automatic protection for storage batteryRadiating modeFan coolingWorking modeGeneral controllerEfficiency≥98%Self -consumption< 10mA< 15mAEnvironmentEnvironmental temperature-10 --55Ambient humidity0--90%,No condensation Altitude≤4500mDimensionUnit size D*W*H(mm)/G.W(kg)257.1*167.6*82.9mm/3kgPackage size D*W*H(mm)/G.W(kg)390*365*365mm(6pcs/carton)/19kg