China N04400 Monel 400 Nickel Alloy Pipe&Bars

N04400 Monel 400 Nickel Alloy Pipe&bars

SizePlate/Sheet:0.3-60mm(THK)*1220mm(WIDTH)*6000mm(LENGTH)Bar:Round:Φ5.5-350mmWire:Φ0.1mm-18mmSeamless Pipe:6mm-219mm(OD)*0.5mm-18mm(WT)Flange:1/2"-56"Fitting:According to the drawing.MaterialAustenite Stainless Steel:Rs-2,317L,904L,253Ma(S30815),254SMo(F44/S31254)Biphase stainless steel F51(S31803),F53(S32750),F55(S32760),329(S32900),A4Hastelloy C276,Hastelloy C4, Hastelloy C22. Hastelloy B,Hastelloy B-2Nitronic50(S20910/XM-19), Nitronic60(S21800/Alloy218), Alloy20Cb-3, Alloy31(N08031/1.4562)Incoloy825, 309S, Inconel601,A286, Alloy59, 316Ti, SUS347, 17-4PH Nickle201... Ect.Monel400, Monel k500, Ninckel200, Nickel201(N02201)Inconel600(N06600),Inconel601(N06601),Inconel625(N06625/NS336),Inconel718(N07718/GH4169),Inconelx-750(N07750/GH4145)Incoloy800H(NS112/N08810),Incoloy800HT(N08811),Incoloy800(NS111/N08800),Incoloy825(N08825/NS142), Incoloy901,Incoloy925(N09925),Incoloy9261J50,1J79,3J53,4J29(F15),4J36(Invar36)GH2132(incoloyA-286/S66286),GH3030,GH3128,BH4145(inconelx-750/N07750),GH4180(N07080/Nimonic80A)Product rangeBolt,nut,screw,washer, thread rod ,flange, fitting, seamless tubes, round bar, plate, wire

1. Product descroption
Introduction
N04400 Monel 400 Nickel Alloy Pipe is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline Senvironments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.

Chemical Composition of N04400 Monel 400 Nickel Alloy Pipe
The compositional range for N04400 Monel 400 Nickel Alloy Pipe is provided in the table below.

ElementContentNi63 % minCu28 - 34 %Fe2.5 % maxMn2 % max

Typical Properties of N04400 Monel 400 Nickel Alloy Pipe
Typical properties of N04400 Monel 400 Nickel Alloy Pipe are covered in the following table.

PropertyMetricImperialDensity8.8 g/cm30.318lb/in3Melting point1350°C2460°FCo-Efficient of Expansion13.9µm/m.°C
(20-100°C)7.7x10-6 in/in.°F
(70-212°F)Modulus of rigidity65.3 kN/mm29471 ksiModulus of elasticity105-120 kN/mm215230-17405 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of SupplyHeat Treatment (After Forming)Annealed/Spring TemperStress relieve at 300-320°C (570-610°F) for 1 hour and air cool.ConditionApprox Tensile StrengthApprox Service Temp.Annealed400 - 600 N/mm258 - 87 ksi-200 to +230°C-330 to +445°FSpring Temper850 - 1050 N/mm2123 - 152 ksi-200 to +230°C-330 to +445°F

Relevant Standards
N04400 Monel 400 Nickel Alloy Pipe is covered by the following standard:
BS 3075
3076 NA 13
DTD 204B
ASTM B164

Equivalent Materials
Equivalent materials to N04400 Monel 400 Nickel Alloy Pipe are:
W.NR 2.4360
W.NR 2.4361
UNS N04400
AWS 040

Applications of N04400 Monel 400 Nickel Alloy Pipe
N04400 Monel 400 Nickel Alloy Pipe typically finds application in:
Marine Engineering
Chemical Processing
Hydro-carbon Processing
Heat Exchangers
Valves
Pumps