China Nc Straightener Feeder 3 In1 Compact Servo Straightener Feeder for Making Air Conditioning Par

NC straightener feeder 3 in1 Compact Servo Straightener Feeder for making air Conditioning Parts
Decoiler straightener feeder is in the short space design were especially developed to meet the needs of customers with not enough space. They offer process reliability even for the most demanding materials. They are optimally suited for the manufacture of structural parts as well as for processing of high-strength materials - even for the higher ranges of strip thickness.

By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for material loop of straightened material can be saved.
Decoiler---The decoiler is designed for coils with outer diameter of up to 1200mm. The coil is drawn off from above across the hinged feed table. Loading is handled by a crane or stacker. The decoiler is expanded manually or Hydraulic. The coil is restrained by a pneumatic pressure roller.
Straightener---The lower straightening rollers ensure continuous coil transport in forward mode and also enable the coils to be rewound when reversed. Additional feed and extraction rollers support the processing of various coils. Optimum straightening results are achieved through manual individual adjustment of the straightening rollers. A bending roller at the threading wedge ensures smooth threading.
Roll feed--- The roll feed, which advances the coil material on the infeed side, is attached to the press by means of an attachment bracket. This enables flexible adaptation to the Press Feed height. It is driven by a servo direct drive unit at the lower roller. Both feed rollers are hard chromeplated and rapid ventilation of the upper roller is actuated pneumatically.

The feeder-straightener is supplied with material out of a (in comparison) very small loop of not straightened material below the decoiler.

The decoiler is equipped with a variable speed drive as well as with a very sensitive loop control. By this way it is assured that there always will be enough material available for supply of the feeder-straightener.

In case that feeding lengths and stroke rates do require a bigger material stock within the material loop, the Coil Feeding Line will be completed with a loop pit.

Mayflay compact press feed line is suitable for all kinds of automobile stamping, appliances manufacturing, computer and electronic componets, hardware and metal parts etc industry.

The future of compact press feed line

Suitable Material: CR Steel, HR Steel, Stainless, Aluminum, Copper etc.
Coil width: 50mm-800mm
Material thickness: 0.4mm-4.5mm
Coil weight: Max.7Tons
Line speed: 20m/min
Feeding length: Max.9999.99mm
With the Yaskawa Servo Systems and Mitsubishi PLC control, the Compact Feeding line can reach ±0.15mm feeding precision.

Specification

Coil Feeding LinesSpecificationModelMFL3-300MFL3-400MFL3-600MFL3-800MFL3-1000Stock Width(mm)50-30050-40050-60070-80070-1000Stock Thickness(mm)0.4-4.5Max.Coil Weight(kg)5000500050005000/70007000Max.Coil O.D.(mm)Φ1400Coil I.D.(mm)Φ508Feed Length(mm)~500*Max.Line Speed(m/min)16-24Straightener Rolls(piece)up 4 / down 3Feed Rolls(set)1Main MotorAC4.4AC4.4AC4.4AC5.5AC7.5Mandrel ExpansionhydraulichydraulichydraulicReel Motor(kw)2.22.22.22.2 / 3.73.7Power(v)3 Phase 220V/380V/50HZOperating Air(Mpa)0.49Straightening PerformanceMaterial Tech-info of thickness & WidthMFL3-300MFL3-400MFL3-600MFL3-800MFL3-10000.3~0.8400400600800100017501.27006001.65904804301.850042038024303703302.33603202902.83703702902502303.23003002502202004.5160160160150110

Remark:1)The above figures are the material having yield strength σs=245N/mm² ,Max. tensile strength σb=392 N/mm²)
2)Specifications are subject to change for improvement without notice.
Pictures

Products
Auto Feeder 3 In 1 is suitable for automobile stamping, appliances manufacturing, computer and electronic componets, hardware and metal parts etc industry.Automotive Parts: Bracket, Damper, Barke Pad, Tie Bar, Electric Accessory, Shell Parts Of Printers, Computer frame,Slide Rail of Car Seat, Splash Shield of car body and etc.

metal sheets stamping line configuration
Customer's Application
NC straightener feeder 3 in1 Compact Servo Straightener Feeder for making air Conditioning Parts is working in customer's factory.