China New Arrival Bathtub Chenille Roller Mop

Large Volume High Temperature Viscosity Material Kneading MachineAVAILABLE PRODUCTS:
DOW Corning, Silicone sealant, sealant,polyurethane sealant ,adhesive, ink, dope, pigment, dye, carbon, CMC, cosmetic, foodstuff, battery, medicine, plastic and other viscosity fluid etc.
CHARACTER:
1) Available models normal pressure, high pressure and vacuum.
2) Temperature adjustment: heated by oil, steam or electricity, cooled by water.
3) Discharge method: tilt dump, bottom dump and screw discharge.
4) The seal of shaft agitator is adopted with unique balance construction of vacuum box, Which owns patent.
5) The cover is controlled by hydraulic system.
Kneader picture and its products:MAIN FUNCTION:
Kneader is a equipment for mixing, kneading, crushing and dispersing viscosity fluid.
Technical parameters:
NHZ5
5
3
NHZ20
20
12NHZ50
50
30NHZ100
100
60NHZ200
200
120
Turn cylinder
NHZ300
300
180NHZ500
500
300NHZ1000
1000
600NHZ1500
1500
900NHZ2000
2000
12001,Temperature range: 0-300°
2, Pressure range:-0.1-0.6MPaAvailable products:
1. Unsaturated resins, alkyd resins, acrylic resins, polyurethane and other complete sets of production equipment;
2. Latex, white latex, rubber coating, film coating, all-purpose adhesive and other complete sets of production equipment;
3. Glass, plastic, silicone rubber, sealants and other sets of production equipment;
4. Raw rubber sets of production equipment;
5. Silicone waste pyrolysis recycling old solvent distillation recovery sets of production equipment;
6. Hot melt adhesive sets of production equipment;
7. Various types of powder mixing auger sets of production equipment;
8. Various non-standard chemical equipment design, production and installation.
Q : Can you send the formula for the products we want to make ?
A : Our machines can be used for many kinds of product making ,
such as Resin , Paint , Adhesive , Cosmetic , Food , Chemicals .
There are many kinds of these products , so it's impossible for us to know all the formulas and technologies .
We can assist you to find theraw material list you need , and after you place order with us ,
we can help you to find formula and technology , there will beengineers to teach you how to make the product ,
and the cost willbe on your account
Q : Do you have machines in stock ?
A : Yes , but just the small-scale machines Machines are different with other products ,
most of the large-scale machines are designed according to our customers'requirements ,
different customers have different production requirements ,
so the technical parameter is different for most machines On the other hands ,
most of the our machines will cover a large area , so once the machines are finished ,
we will effect shipment after QC .
Q: Can you send the detailed drawings of the machine to us before we place order?
A: We can send you a draft drawing of the machines, and after you place order and pay the deposit,
our engineer will design thespecific technical parameters fo you and send you the detailed drawings.
once you confirm without questions, we will put it into production
Q: Why does it take at least 20 days to finish the machine?
A: once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessoriesfor the production.
once the drawings are finished, our workerswill start the production, from welding, polishing, assembling,debugging,
detection and so on. After finish, they need time tocheck the machines,
if found any possible defect parts, they will return to the production until every part is 100% approved
Q: Can we pay the balance after we receive the machines and test without problems?
A: It's unnessary to worry about the quality of our machines, weare confident in that.
After the machine is finished. we can installand test the machine for you(
if you can not come to our factory,we can record a vedio and send to you).
only after you check without problems, we will effect shipment.