China New Automatic CNC Wire Mesh Welding Machine

Electrical control system: Uses PLC programmable controlling, Other parts all is famous brand. Using a unique electrical operating system, with a failure alarm function, the touch screen display can intuitively see welding parameters, is easy and fast for operation. Thus reduce the requirements on the operator.

Cooling water system: Is divided into transformers cooling, up electrode cooling, lower electrode cooling and other copper block cooling. It come true the water distribution by flowmeter. Each flowmeter can be adjusted individually to make machine working normal, without damage.

1). This kind reinforcing mesh welding machine is our latest developed reinforcing mesh welding machine.

2). The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by theservo motor, pulling the wire net by the servo motor automatically.

3). The welding power comes from the spring. It is easy to control the welding pressure.

4). The weft wire feeding from the multi hopper which capacity is 1.5t, more over ten times than the traditional hopper.

5). The new reinforcing mesh welding machine added the bear wire net and carries equipment that makes the working more convenience. The welding part is used the springiness input wire trunking that makes the welding copper use for long time.

6). 120KVA Transformer with water cooling system and separately welding controller.

7). This reinforcing mesh welding machine adopts synchronous control technique.

ModelGWC-2500-IIIWelding speed40-60 times/minWire diameter3.0-6.0mmRated power75KVA X 6Longitude wire space50-300mmlongitudinal wire feedingWire rod wire feedingCross wire space50-300mmCross wire feedingPre- straightening & pre-cutMesh widthMax.2500mmOverall Size6*3.1*1.7mWelding points51Length wire net adjust

(3-5mm or 4-8mm).

(2000mm,2500mm,3000mm).

(50-300mm or 100-300mm).

(According to your needs).

(The standard is 380V 50HZ).