China New Patent High Precision Good Flexibility 13 Sets Free Dies Hose Press Crimping Tools Machine Swaging Machine Hydraulic Hose Crimping Machine

TECHNICAL DATAESMax hose size2"6SSwaging range(mm)Φ 6-87Master die shoe length(mm)85Standard voltage380V/50HzMotor power4kWOptional voltage &motor220V/2.2kWPump(l/min)19LNumber of swagings/hour1000Noise level (dB)70Max opening(mm)Φ+34mmCrimping force(kN)5260Electric limit switchincludedElectronic controlincludedElectric pedalincludedManual changeincludedDimensions LxWxH(mm)650x500x1300Weight without oil350KgDispenserOptionalQuick changeOptionalLongerOptionalSpecial diesOptional
Main Feature:
1. Microcomputer Control, Taiwan's Hydraulic System;
2. Overall replacement of mold;
3. Extended mold;
4. Its motor for driving the knife is easily controlled using a foot pedal which allows the operator to use both hands for guiding the hose through the process.
5. Simple structure, easy to operate and maintain.




Notices
1.When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.
2.Prevent tool and other foreign matter from entering the locking head.
3.After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
4.When working, the hand should not stretch into the locking head.
5.The power supply must be switched off when maintenance is done.
Maintenance and Care
Maintenance
The hydraulic oil in the oil tank should be frequently checked, if oil amount is found to be insuf- ficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or replaced.
The locking head shall keep internal cleanliness. Avoid the foreign matters during processing to enter into the locking head oil cylinder via the mould to affect the normal use. Wipe out the foreign matters, which are brought by the mould body in time when buckling the joint.
Frequently fill suitable grease into the mould body for lubrication.
Promise
We will provide a guarantee to keep the machine in good repair within 12 months from the day when the machine is purchased. All fitting troubles will be free of charge repaired (or replaced if necessary) during the guarantee period. The damage resulted from improper use o accident damage does not belong to free of charge repair range.
The Packing List
1.The high pressure locking tube machine in model DX 68 one set
2.Mold (Total 10 Sets)Φ6 1 set
Φ10 1 set
Φ13 1 set
Φ16 1 set
Φ19 1 set
Φ22 1 set
Φ25 1 set
Φ32 1 set
Φ38 1set
Φ51 1set

Troubleshooting
Trouble phenomenaTrouble reasonEliminating methodMachine has not actionOil tank has not been filled with oilFill oil as per requirementMotor rotation direction is not correctRegulate two phase linesElectric troubleOverhaul electric circuitsScale is damagedThe scale is fastened on the oil cylinder end face by the screwRegulate the scale as per the instruction to make scale to telescope freelyConductor at scale location is connected with scaleAnew connect the scale conductor to make it to be insulated from scale baseElectric troubleOverhaul electric circuits and electric elementsScale conductor cuttingAnew connect scaleSystem pressure is excessively lowAdjust buckling pressure-regulating valveNo bucklingThe valve core of solenoid reversal valve is seizured by foreign mattersDismount solenoid reversal valve, use gasoline to clean the valve core.Electric troubleOverhaul electric circuitsMould is not openedOpening mould pressure is excessively lowAdjust opening mould pressure regulating valveElectric troubleOverhaul electric circuitsBig noiseInstallation is not stableConduct horizontal stable installationHydraulic oil is excessively dirtyFilter or change itFilter is blockedUse gasoline to clean the filterMould base crawlsGas in the hydraulic oil has not bee exhausted completelySuitable unscrew the bleed screw, make the piston in the oil cylinder to move back to last position to exhaust gas, then screw down bleed screw.Lubrication is poorSmear grease on the working inclined face of mould baseOil leakageJoint is not tightened closelyTighten the oil pipe jointSealing washer is damaged.A parameter list of the tooting and the press force for every type of rubble tube(for reference)

order
Inner diameter of the rubble tubeOuter diameter of the
rubble tube
Used tootingHalf locking & pressing meter pressure MPaWhole locking & pressing meter pressure MPa
1
Φ6 Φ15 Φ17
Φ155.5
66~8
9~11
2
Φ10 Φ19 Φ21
Φ216.5~7
7.5~810~11
13~16
3
Φ13 Φ23 Φ25 Φ27
Φ25
8.5~9
10~11
14~17
15~18
4
Φ16
Φ26 Φ28
Φ28
9~10
10~11
15~18
18~22
5
Φ19 Φ29 Φ31 Φ35
Φ309
11~12
22~2415~17
20~22
29~31
6
Φ22 Φ32 Φ34 Φ38
Φ3412~13
14~16
20~2517~19
19~21
25~30
7
Φ25 Φ36 Φ38 Φ42
Φ3810~11
15~16
26~2816~18
20~24
28~32
8
Φ32 Φ44 Φ46 Φ50
Φ42 Φ4512~13
16~18
3218~22
30~34
32~38
9
Φ38 Φ50 Φ52 Φ60
Φ50 Φ5514
20
26~3022~26
28~32
44~48
10
Φ51 Φ63 Φ65 Φ69
Φ60 Φ6525
30
3526~28
40
48Is there any other type machine I can choose?
We offer various types of hose crimping machine. If you are interested in any one, Any questions are welcome.
FAQ:
1. What level of service do you provide ?
*Your inquiry will be replied in 24 hours.
*Eight continuous years as an Alibaba Gold supplier and more than 25 years industrial technology and manufacturing experience .
* We offer free spare parts and service within 14 month warranty period.
* Technology Support by providing operation training videos .
* Professional after-sales service team.
* Give reasonable offers with the best quality.
2. What is our advantages?
* Competitive price: We can meet your budget and best-selling business very well.
* OEM Accepted: We can produce customized design.
* Good Service: We treat clients as friends and provide problem solving anytime you need.
* Good Quality: We have strict quality control system. Good reputation in the market.
* Fast & Delivery: We have big discount from forwarder (Long-term Contract).
* Door To Door Service.
3. Can you customize the machine for the customer?
Yes. We can, we also provide OEM for customers; If you need customized services, please contact us
4. What is the MOQ?
We usually provide 1 set for customers to test.