China Nitrile Rubber Hose Frac Hose 2" 3" 4" 5"6" 8"10" 12"

NBR frac water hose

Tube and cover: Nitrile /PVC Blend, ribbed cover for maximum abrasion resistance thick wall.

Reinforcement: 100% virgin high tenacity polyester Jacket

Color: Black, Red, Yellow, orange, Blue

Package: Rolled, packed in carton or loaded in pallet

Application: Water discharge, Transfers, Drainage, Irrigation installations, Pumping of sludge and liquid fertilizers, Irrigation, Chemical industry, Refineries, Air-pressure
Standard length: 15m (50ft), 20m (66ft), 30m (100ft), 60m(200ft), 90m (300ft), 200m(660ft), 300m(990ft), also can be customized according to requirements

Manufacturing Technology: through-the-weave technology without delamination issues
Hose shall be made from 100% high tenacity synthetic yarn circular woven and completely, protected and locked-in by tough highly resistant synthetic nitrile rubber, forming a single homogenous construction without the use of glues or adhesives of any type.

Lining Properties:

a. Ultimate Tensile Strength:Tensile strength of the lining and cover shall not be less than 1500 psi (10,500 kpa ).

b. Ultimate Elongation: 400% minimum.

c. Accelerated Aging Test

The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 psi +/- 10 psi , (2100kpa +/- 70kpa) and temperature of 70degrees centigrade +/-1 degree centigrade (158 F +/- 18 F ) for a period of 96hours shall be , greater than 60% of the original properties stated.

Temperature range: From -30 C deg to 80 C deg (-22 F deg to 176 F deg)

Abrasion Resistance: withstand 101000 cycles.