China Non-Embossed Film

Non-Embossed Film for Electronic Product
Raw materials: LDPE
Adhesive: Acrylic base
Thickness: 45u~150u
Color; Transparent/clear
Standard specification: 1250mm x 200m/roll
Adhesion: 5g/10g/12g/20g/30g/40g
Film type: Non-Embossed/Embossed film
Packing: Plastic core with 76mm inner dismeter, one roll/carton
Application: Use to protect dedicate surface of electronic devices and appliance, such as the display screen of mobile phone, camera, LCD panels etc. From damage and scratch during transporation, storage, process and installnation.
TECHNICAL DATA
SURFACE PROTECTION SERIES
APPLICATION OF ANTISTATIC CLEAN MASKING FILM (EMBOSSED TYPE)
Preferably the PE film masking should be applied by mechanical means. But results are obtained at a temperature not above 180ºC.
PRECAUTIONS
Adhesive properties are susceptible to change due to following parameters: chemical state of the surface to be protected; presences of impurities within or on the substrates; adhesive surface over touching with solvent directly.
STORAGE
The PE film masking can be stored for six months, in its original packaging and dry conditions. The rolls should be protected from extremes of temperature and direct sunlight & UV light. Out of its containers, the PE film masking should be protected against dust and other impurities.
Tests should be conducted under actual applications conditions.
TECHNICAL DATA
base material: LDPE
Color: Clear…
Heat Resistance: 180ºC& 12hours without glue residue

Item
No.ColorThickness (Micron, by Average)180° Peel Strength (g/25m, by Average)Elongation at Break (%)Tensile Strength (MPa)5W1-012Transparent50u12g/25mm±3g/25mm≥200%>5MPa5W1-008Transparent50u 8g/25mm±3g/25mm≥200%>5MPa 5W1-040Transparent50U 40g/25mm±3g/25mm≥200%>5MPa 4.5W1-012Transparent50U 12g/25mm±3g/25mm≥200%>5MPa

Main Application: ANTISTATIC CLEAN MASKING FILM is coated with Antistatic coatings and especially designed for Antinstatic purpose and used for surface protection on LCD panel/screen, PDA screen, electronic, steel, plastic sheet, PCB, FPC and etc. Product comes from 10000 class clean room. It can provide protection from dust, scratch, bang, damage, heat, static and etc.

The information contained herein is typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control.