China Non-Pollution Hospital Negative Pressure Isolation Chamber Capsule Transport Patient Isolation Stretcher Bed

Product Description

Introduction:

Isolation chamber is equipped with its own negative pressure filtration system to provide maximum protection and operational safety for both the contaminated person or item and the operational team.

Features:
1.The chamber liner is made from a special TPU film and strengthened by inserting ABS poles along each side of the structure.
2.The "all around" zipper system allows for the chamber to open completely giving easy operator accessibility.
3.The chamber has ten integrated glove portals on three sides to allow for easy access to the patient and two utility portals used for infusions and other medical equipment.
4.Isolation chamber is a fully collapsible unit that requires minimal storage space and is ready for use within seconds.
5.Isolation chamber complete with Batteries for up to 8 hours of continuous use before battery charge required.
6. The chamber negative pressure will be up to -15pa only in 2 minutes after power on.
7.The Isolation chamber can be used with a stretcher, which will be easy to move the patient.
8. Belt system enables the patient to be fastened while in the chamber or the chamber is securely fastened to a stretcher or bed.

Model

EA-13A

EA-13M

Unfolded Size (L*W*H)

HEPA Filter

1900*690*500mm 1000*500*500mm

4pcs, 99.999% efficiency for 0.3μm particles

Airflow Rate

Chamber Noise

67±10%

<47dB(A)

Alarm

Negative Pressure

Audio and visual alarm for internal pressure insufficient and low power

Up to -15pa in 2 minutes after power on

Standard Accessories

Consumables

The main chamber, 4pcs disposable HEPA filter, Negative generation system, 20pcs PVC gloves, Battery and charger

HEPA filter, PVC gloves

Disinfection

Disinfect the isolation chamber for 6 hours with ethylene oxide gas(600mg/L) under the condition of temperature 54ºC and relative humidity 80%

Optional

Load-Bearing

Stretcher

Up to 150kg

Power Supply

Package Size(L*W*H)

AC220V±10%, 50/60Hz; 110V±10%, 60Hz,

Battery voltage: DC12V

770*570*640mm(carton box);

770*570*540mm(carton box)

Net Weight

Gross Weight

18kg15kg

20kg18kg