China Non-Woven Galvanized Water Dust Filter in Powder Coating Industry

Custom Non-Woven Galvanized Water Dust Filter In Powder Coating Industrial

common dust filter - Design Structure
»Wide and fold away design
»100% high-tenacity polyester
»Top of the opening at the bottom of the design reduced mounting holes
»Galvanization metal mesh components
»imports of NBR rubber sealing tape
»High efficiency filter

1. Quick release dust filter powder recovery, widely used in powder coating industry, blasting equipment, painting and dusting equipment, environmental dust, metal dusting and other places.

2. Cartridge overall by the quick release cover, quick release cover, galvanized sheet metal forming lower cover, gasket, galvanized (stainless steel), diamond mesh, non-woven fiber filter and other components.

3. Also can custom-made size.

FF-PT common dust filter - Applications
The filter for powder recovery widely used in powder coating industry, blasting equipment, painting and dusting equipment, environmental dust, metal dusting and other places to apply to the major OEMs surporting

Universal dust filter according to the filter material is divided into A, B, C, D, four levels, different filter performance to meet different levels of powder recovery.

Filter as a whole is cylindrical, and C-level filter from top to bottom cover for the plastic filter cover on the other levels for the electrolytic plate or stainless steel plate stamping molding. C-level filter using the triangle sealing gasket and other levels of the filter with a flat tooth NBR seals. C-level filter using diamond mesh filter of the other levels of galvanized perforated metal mesh or stainless steel perforated metal mesh, PT all filter filter resin seal, with excellent tensile strength, impact resistance, ensure that no off cover , does not leak powder. PT dust filter installed three ribs, ribs Changwei proprietary material system, have excellent tensile deformation capacity, no rust, do not top off the mortgage to cover the advantages.
PT dust filter according to their height can be 400mm-1250mm a variety of sizes, and some special applications useful to 2500mm high, our company can also produce. In accordance with its foreign economic size diameter of 150mm, 180mm, 230mm, 240mm, 280mm, 300mm, 325mm, 350mm, 400mm, 500mm and so on 10 kinds of commonly used specifications. The choice of a variety of specifications to facilitate equipment manufacturers, to tie itself to the size of the machine, the fan flow and equipment modifications margin to select a different filter, all filter both with the customer to install the inner diameter of the turn vane backflush device size (220mm)

The instruction of the installation

avaiable models size of Industrial filters for Powder Coating