China Nt-M2000e Programmable Magnetic Swipe Card Access Control Systems

Main Characteristic

The product can be widely used as exit switch .With the authorized card controlled by Magnetic card reader access controller, only a part of people have the right to enter in.online working or offline working is available.
Swiping card record can be stored to computer by connecting with RS323/485 converter alerting signal will be output once the computer in danger condition.

With two groupsof signel output, one group is RS 485 signal contact to computer ,to achieve authorizing cards,recording,outputting alerting signal and remote control. Theother group is relay contact signal to control access controller ,electric lock and autodoor unit.

This productattaches with apply software(o ne purchase)On-lineworkingor off-lineworking optional
Designed with anti-theft control button(as the picture shown). The butt on will bounced and the control system will issue a buzz ASAP the magnetic card access controller left the install ation wall.
The power indicator and pattern indicator will light up simultaneously with the sound of "beep beep" for the initial use. When the patten indicator extinguished, the product runs into a normal operation.
In normal operation mode,swiping the authorized card, open signal will be output with gree light. and then door can be open.

Technical parameter

Supply power:DC12V

Quiescent current: 32mA Action current: 52mA

Output sinal: Relay N.O. Contact

Contact capacity:2A 12VDC Output hold time:3s

Communication method:RS232/485 Communication speed:9600bps

Card feeding speed:10~120cm/s

Magnetic card standards:IS07811-7815