China OCPP-80N 3 Inch POS Receipt Bill Printer with Auto Cutter

3 inch pos receipt printer with auto cutter
(OCPP-80N)

Key words:
POS Printer;
pos receipt Printer;
3 inch receipt printer
OCPP-80N is a high quality 80mm thermal bill printer with auto cutter for POS , it is high speed printer and works well for thermal receipt printing. the application includs Supermarkets, restaurants, logistics, drug store...
POS bill Printer Features:
1. Support QR CODE printing
2.Serial+USB+Lan interface
3.100MB Ethernet interface connection transfer data efficiently
4.Support international Languages
5.Support overtype function
6.Printer status monitoring
7.Built in web page to set up printer directly
8.Input buffer 2048K bytes
3 inch receipt Printer Sprcification:

Printing methodDirect thermal Print width76mmColumn capacity576 dots/line 512 dots/linePrinting speed300mm/sInterfaceSerial+USB+LanPrinting paper79.5±0.5mmxφ80mmLine spacing3.75mm (Adjustable by commands)Column number80mm paper: Font A - 42 columns or 48 columns/Font B - 56 columns or 64 columns/ Character sizeANK,Font A:1.5x3.0mm(12x24 dots) Font B:1.1x2.1mm(9x17 dots) Chinese,traditional
Chinese:3.0x3.0mm(24x24 dots)CutterAuto cutterFull or partial ( Optional)Barcode CharacterExtension PC347(Standard Europe),Katakana,character PC850(Multilingual),PC860(Portuguese),sheetPC863(Canadian-French),PC865(Nordic), West Europe,Greek,Hebrew,East Europe,Iran,WPC1252,PC866(Cyrillic#2),PC852(Latin2),
PC858,IranII,Latvian,Arabic,PT151(1251)Barcode typesUPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)/CODE39/ITF/CODABAR/CODE93/CODE1282D codeQR CodeBufferInput buffer2048k bytesNV Flash256k bytesPowerPower adaptorInput:AC 110V/220V, 50~60HzPower sourceOutput:DC 24V/2.5ACash drawer DC 25V/1AoutputPhysical characteristicsWeight1.48KGDimensions185x140x134mm ( DxWxH)Environmental RequirementsWork environmentTemperature (0~45) humidity(10~80%)Storage Temperature(-10~60ºC) humidity(10~80%)environmentReliabilityCutter life1million cutsPrinter head life100KM

OCPP-80N : POS Printer;pos receipt Printer;3 inch receipt printer
3 inch thermal Printer
Serial+USB+Lan




a. Plug the DC cord connector into the printer's power connector..
b. Plug the data cable connector into the printer's interface connector.
C. Plug the drawer cable into the drawer kick-out connector on the back of the printer next to the interface connector.

a. Open the printer cover.
b. Install the roller in the roll paper, and put them into the printer.
c. Pull out some paper outside the printer and then close the printer cover.
d. Close the top cover. Press the printer cover to avoid error position of roll paper.
e. Tear-off the paper correctly.

The DIP switches are used to set the printer to perform various functions, such as cutter mode, character set, speed, beeper, print density and etc.

The thermal series printer have two way for drive, one is install the drive directly under the WIN9X/2K/NT/XP; another is use parallel or serial directly.

(1) Install the drive under the WINDOWS
Add the printer under this windows, and appointed drive document to windows, you can print with transfer print command in the program. Under this way, it is actually transfer the character to dot matrix to print.
(2) Serial/Parallel drive directly
In this way, don't use the drive program, just need to direct character output to the port, and achieve transforming by printer internal hard character; the drive way is use port directly. The print mode is change from page print to row print, so that print control is more convenience. If you use direct drive port, you need to use the print command collect to control the printing, and 80mm series printer has been integrated with the ESC/POS command set.

You need to clean the printer if have below issue:
(1) The printer is not clear
(2) Vertical page in a column is not clear
(3) Feed noise

The printing head cleaning step:
(1) Turn off the printer and unplug the power cord, open the upper cover, if have a paper, please clean out.
(2) Until the printer head cooling you can clean.
(3) Wipe the damp cloth with alcohol (without water) cleaning the printer head surface is having dust, spot.
(4) Waiting the alcohol completely volatilize, please close the upper cover, and try again to print.

Notice:
(1) You must make sure the power cord is close when you maintenance the printer.
(2) Don't touch the printer head surface with your finger or metal goods, don't use the forceps etc tools avoid to scratch the printer head, print roller sensor surface.
(3) Don't use the oil, acetone Ect organic impregnant.
(4) Waiting the alcohol completely volatilize, open the power again and continue print. Turn off the power, cover the top, if there is paper, remove it.


The receipt printer can work on a lot of locations, such as the TAXI bill printing, administrative fees receipt printing, post receipt printing, restaurant ordering information printing, online payment information printing, etc, this printer will be more widely used in the near future.

1. Air, Sea, Express(DHL, FedEx, UPS, EMS, TNT and so on)
2. EXPRESS: around 3-7 working days to arrive
3. INTERNATIonAL AIR MAIL: usually around 2-4 days to arrive, will also depend on which destination port
4. By sea: depend on which destination port


1. T/T
2. Western Union
3. Escrow
4. L/C

Warranty:
12 months of shipment normally. Some designated models can have as long as 24 months warranty.

RMA Procedure:
If you suspect your product is not functioning properly, please contact us to help determine whether your product is defective within warranty. once determined defective you will receive an RMA
authorization number for repair or replacement. Customers will return the defective product to us. Upon receipt of defective products, warranty verification will include visual inspection and testing
for normal wear and tear, alteration, and functional compliance of the OCOM product. Defective
products will be repaired or replaced and shipped via express within 30 days or best effort.
Customers will not be charged for warranty repairs. However, if a returned product does not meet warranty verification then testing, repair, and/or shipping fees may apply.
Dead-on-Arrival (DOA):
Any product found to be defective within 30 days of shipment shall be deemed Dead on Arrival (DOA). DOA products will be advance replaced and shipped via express.