China Obm Drilling Mud System for Oil Based Drill Cuttings Management

OBM Drilling Waste Management for Oil and Gas Drilling / Drilling Cuttings Management System

Introduction

Drilling waste management system, also called as drill cutting treatment system or drilling cutting management system. According to different applications, it can be classified as water-based drilling waste management system and oil-based drilling waste management system. The main system equipments are drying shaker, vertical cutting dryer, decanter centrifuge, screw conveyor, screw pump and mud tanks. The drilling waste management system can effectively control the moisture content (6%-15%) and oil content (2%-8%) in drilling cuttings and stabilizes the liquid phase performance.

TR drilling waste management is used for taking drilling fluids from the drilling cuttings and clean the fluids for resuse. It is to maximize the recycling of drilling fluids, and minimize the drilling waste in order to save cost for operators.

Features of TR Drilling Waste Management

For oil based drilling cuttings, normally it can reduce the oil on the cuttings to 3% to 5%.For water based drilling cuttings, normally it can reduce the moisture content for easy transportation.Recycling drilling fluids for reuse to save cost .Reduce the drilling waste quantity to save money on the disposal or further treatment.

Technical Data of TR Drilling Waste Management

S/NS/NDescription1Vertical Cuttings DryerTRCD930 with option for VFD or fixed speed2Decanter CentrifugeTRGLW355Centrifuge 14inch bowl,Optional model as below:
TRGLW355 Centrifuge with VFD drive.
TRGLW355 standard with fixed speed3Screw PumpTwo sets TRG30A-075 Screw Pump with capacity:30m³/h for each pump.
One for taking fluids from catching tank to feed the decanter centrifuge,the other for flushing the Vertical dryer.4Skid with catching tankFast move skid for mounting all the equipment
One Catching tank with capacity:4m³ for catching fluid from vertical cuttings dryer.5Telescopic SkidTwo telescopic skid with walkways and handrails for safe operation.
One for mounting the decanter centrifuge to a higher position in order to allow the centrifuge discharged fluids feed to active mud system by gravity.
The other telescopic skid for mounting and adjusting the height of the vertical cutting dryer to allow the discharge of drying cuttings6Electric Cradle0.5 Tons electric cradle for lifting the components of vertical dryer7Electric Control SystemTwo lighting system,electrical control boxes and cables and plugs for operation the complete system.

TR Solids Control is a professional manufacturer of drilling waste management and solids control equipment. We could provide one-stop service for your oil and gas drilling requirements. If you have any inquiry about shale shaker, shaker screen, mud cleaner, desilter, desander, mud agitator, jet mud mixer, decanter centrifuge, centrifugal pump, shear pump etc, welcome to contact us freely. TR will provide our best price and service to you.

Competitive Advantages
1. We offer high quality products at competitive price.
2. Shortest delivery time.
3. Flexible payment terms.
4. Timely after-sale service.
5. Most of our equipment can be replaceable with international brands.
6. Our products have been exported to Argentina, Egypt, US, Australia, Romania, Pakistan, Dubai, Abu Dhabi, Iran, India, Indonesia, Vietnam, Malaysia and many other countries.

Company Tenet
Customer's satisfaction is the highest pursuit of TR Solids Control.

http://www.trsolidscontrol.com/

Tag: mud recycling system,mud treatment system