China Oil Refining

ALKALI REFINING OPERATION METHOD
A, Low temperature but strong alkali process: The alkali quantity shall be decided by the oil acid according to the under-mentioned table, adjust the oil tempeture to 20-30 centigrade, then add the 20-30Be alkali water within 5-10 minutes, at the same time, the mixing speed is 60R/Minute can mix for 20-60 minutes, then observe the response of the saponin, increasing the tempeture slowly and step by step when the Soap particles separation conditions began to slowly warming form, increase 1 centigrade minute, when the temperature reaches 60 centigrade, stop the mixing, then it is time for settlement, which normally takes 6-8 hours and then released saponin.
B\High temperature but weak alkali process:
The alkali quantity shall be decided by the oil acid value according to the under-mentioned table, and calculating the needed alkali amount and amount of water.
If the acid value is lower than 5, as for reducing each acid value, 23kgs water needed per 1.0kg of oil;
If the acid value is higher than 5, no excel the 12% of oil weight, excel amount of alkali is 0.55-0.22% of oil weight
NamePowerSizeQuantityREMARKSNeutralizing tank1.5kw +0.75kw800*800*2000MM2 SETS
Decoloring tank2.2KW800*800*2000MM1SET
Deodorizing tank0.0800*800*2000MM1SET(Stainless steel)Vacuum pump5.5KW1200*500*400MM1SET
Steam generator
400*400*1200MM1SETTo provide steam to Decoloring tank and Deodorizing tankConducting oil furnace3.0KW1000*1000*2500MM1SETFirewoodAccessory equipmentFilter + Air compressor+carclazyte pot + caustic soda potOccupied area4500*1500*2500MMTotal Weight5.5TonsShippingOne 20’ GP Container could hold 2 sets of Small-Sized Complete Oil Refining System