China Olamlife OL-TW01 New Technology ABS Plastic Night Light 300ML Humidifier Aroma Diffuser For Home Hotel Bathroom Spa School

Specification
Dimensions
Approx 138.5 x 143.5 MM
Weight ( excluding adapter )
Approx 300g
Power: Input/Output
AC100-240V 50.60HZ / DC24V 500MA
Length of cord
Approx 150CM
Electric consumption
Approx 10W
Time Mode
1H/3H/6H/ON
Tank Capacity
300 ML
LED light
4pcs
Materials
PP/ABS/PC
Accessories
AC Adapter and manual
Method of mist production
2.4 MHz
Sparge
30ml/h
Color
Deep wood/light wood grain
Maintenance:
After using 5-6 times , or 3-5 days , please clean the product as follow :1. Unplug the unit from mains supply and remove cover .
2. Pour out any remaining water from the tank .
3. Add a small amount of warm kitchen detergent remover and water , use swab to wipe it gently , and then use cleaning cloth to
dry it lightly .
4. Avoid water flow into the air outlet , pour off water abide by the left picture , not the right one .
5. Do not use other acids or enzymes detergents , as this may give off poisonous gas or cause malfunction . Note : Be sure to use a mild detergent.
Detials Images
Products Description
How to use ?
1. Lift up the cover
2. Insert the power cable
3. Add water and add drops of essential oil
4. Press the button to turn on
What's the function ?
---Aromatherapy
---Humidification
---Night light ( 7 led colors )

The package :
---Including product item
---Adapter ( as per customer request standard )
---User manual
How to use the button to setting the item ?

Fog/timer button
* Press once: fog made for 1 hour
* Press twice: fog made for 3 hours
* Press the third: fog made for 6 hours
* Press the fourth: turn off the diffuser Light button
* Press once: Turn on the LED light, change the color automatically, rotate 7 colors.
* Press two times: manually change the LED color .
* Hold down for 2 seconds: turn off the light
Precautions :

1. Product use time : 6 hours
2. The amount and intensity of mist produced will vary , but this is normal and should not be considered as a fault .
3. Factors that affect this include water type , humidity , temperature , air currents .
4. Auto power off when water runs out.
5. Applies only 100% natural essential oils , if they contain chemical ingredients , flavors or impurities may cause damage to the
product.
6. Before replacing another essential oils , follw the maintenance part of the clean-up products .
Accidental Leakage : In the event of the unit being knocked over or tipped during use , please follow the steps as below to avoid malfunction :
1. Unplug the unit and remove cover .
2. Pour out any remaining water from the water tank .
3. Shake the unit gently to drain water , and then keep it natural air drying for at least 24 hrs .

Company Profile
We are a manufacturer specialized in LED Lighting and all kinds of life sterilization products , Sensor soap dispenser , Aroma
diffuser , for more than 10 years, with a workshop of 5000㎡ & normative quality control system, starting from 2009.
We are still keeping working harder and harder to innovate more and more new products to meet our customers' needs.Our team with cutting-edge designers and R & D team. Our product's core design philosophy comes from life and nature.Available OEM/ODM and trial orders.

Certifications
Related products
FAQ
Q: Will not switch on or switch off ? A: Please add water to the tank .
A: Please disconnect , check cables and re-connect carefully .Q: No mist or abnormal mist ?
A: Please add suitable amount of water in the tank , water must never be filled over 300ML line .
Please refer to maintenance instructions remove and re-install correctly , so vapors can be released freely .
If too much dust in the air suction port , the mist will be restricted to come out . Just clean it .Q: Water leakage from product ?
A: Please Remove and reinstall correctly , so vapors can be released freely .
Under these conditions , the mist may condense quickly into water droplets . Q: Are you manufacture or trade company ?
A: We are a manufacture with more than 10 years production experience . Q: What's the delivery time ?
A: Less 100 pcs , we will have finish products in stock .
101-1000pcs , the production time is about 7-12 working days .
1001-10000pcs , the production time is about 12-18 working days . Q: Can we get samples to test ?
A: Yes , sure , welcome to get samples test , we have not MOQ limit for samples . Q: What's the payment method ?
A: We can accpet payment by TT , Paypal , Alipay , Alibaba ( Credit card ) and so on . Q: What's the shipping way ?
A: We use the carton box , suitable shipping by Express ( DHL , TNT , FedEx , UPS ) , by Air , by Sea .
Contact us
Come back to homepage :

https://olamtech.en.alibaba.com/If have any inquiry , please sent message to us . Welcome to get samples and bulk order from us .