China Original Enerpac Remote Manual Directional Control Valves

1>. VC-Series, Remote Manual Directional Control Valves
Reliable Remote Control
Advance/Hold/Retract operation for use with single-acting or double-acting cylinders
Valve
OperationUsed with
CylinderValve TypeModel
NumberWeight(kg)ManualSingle
Acting3-Way, 3 Position,
Tandem CenterVC-32,9ManualSingle
Acting3-Way, 3 Position,
Tandem Center,
LockingVC-3L4,7ManualSingle
Acting3-Way, 3 Position,
Closed CenterVC-152,9ManualSingle
Acting3-Way, 3 Position,
Closed Center,
LockingVC-15L4,7ManualDouble
Acting4-Way, 3 Position,
Tandem CenterVC-42,9ManualDouble
Acting4-Way, 3 Position,
Tandem Center,
LockingVC-4L4,7ManualDouble
Acting4-Way, 3 Position,
Closed CenterVC-202,9ManualDouble
Acting4-Way, 3 Position,
Closed Center,
LockingVC-20L4,7
2>. V-Series, Hydraulic Pressure and Flow Control Valves
Enerpac flow and pressure control valves are rated for 700 bar operating pressure
All valves feature NPTF porting to insure against leakage at rated pressure
All valves are painted, coated, or plated for corrosion resistance
Needle valves: to control cylinder speed
V-82: can also be used as shut-off valve for temporary load holding
V-182: as V-82, also suitable for gauge snubbing
V-8F: as V-82, but with very fine metering for precise flow control. Not remommended as shut-off valve
V-91: Snubber valve, prevent snapping of gauge pointer when load or pressure is suddenly released. Also suitable as shut-off valve to protect gauge during high cycle applications
V-10: auto damper valve; protect gauge during high cycle applications
Check valves: for load holding with cylinders, to control oil flow direction
V-17: to resist shock and operate with low pressure drop
V-42: pilot-operated, pilot pressure ratio 14%
V-66: manually operated
V-66F: same as V-66, but with fine metering for precise oil flow control
Pressure relief valves: limits pressure in circuit developed by pump
V-152: ±3% repeatability
V-161: sequence valve; to control oil flow to a secondary circuit.