China Original Huawei Me60 Series Industrial Router VPN Router Me60-X16

Original Huawei ME60 Series Industrial Router ME60-X16 VPN Router

Product Description
ME60 Series Multi-Service Control Gateways

High-capacity Broadband Remote Access Server (BRAS) with tightly integrated Hierarchical QoS and unified user access and management features.

Highly scalable with slots to provide various port types from 64 Kbit/s to 100 Gbit/s, up to 240 Gbit/s subscriber access line card. Supports up to 64K subscribers per Line Processing Unit (LPU), up to 256,000 subscribers per chassis.

Rich IPv6 support and industry's largest capacity Carrier Grade NAT (GCG) service board enable smooth migration from IPv4 to IPv6 networking.

Features

Performance, reliability, security, and comprehensive subscriber services and monetization features make Huawei's ME60 the easy BRAS choice2 Tbit/s hardware platform supports high-capacity routing boards (10 Gbit/s to 240 Gbit/s) and Carrier Grade NAT (CGN) boards up to 160 Gbit/sCapable of processing 1,000 user access requests per second per chassis; over 60,000 users can connect in one minuteSupports Destination Address Accounting (DAA) and alternative access modes including IPoX, PPPoX, 802.1x, and web authenticationRedundant, non-stop design implements Virtual Router Redundancy Protocol (VRRP+), and Bi-directional Forwarding Detection (BFD) for link, BFD for VRRP1 + 1 or 1:1 inter- and intra-chassis hot backup ensures subscriber services are always onlineSupports NAT44, NAT64, DS-Lite, and L2NAT400G hardware platform & 1st 40G BRAS

The ME60-X series chassis is designed on the 400G hardware platform and 10G/20G/40G flexible plug-in cards which provide the most flexibility to meet different requirements and reduce OPEX. And based on the self-developed chipset and abundant experiences in BRAS area, the 1st 40G BRAS in industry was released. Persistent and long term investment guarantee continuous evolution solution in ultra bandwidth era.

Largest concurrent subscribers

256K subscribers per chassis and 32K subscribers per LPU can be managed in a ME60, the operation and management are simplified. Meanwhile, Users can access the network through Ethernet, xDSL, WiMAX or PON. In addition, granular management is kept, and ME60 can provide multidimensionality management for subscribers, for example, security control, accounting, subscriber and services identifications, etc.

Elaborate operation capability

The ME60 is the creator and leader of Multi-Service Control Gateway in industry. With the elaborate operation ability, it can provide total full service bearing solution, making singlemetro and multi-play come true. Meanwhile, with the RACS (resource and admission control system), the ME60 can provide elaborate operation solution to provision Video on demand, QoS on demand, Dynamic Service selection, and so on.

The most complete H-QoS solution, including H-QoS, DS-TE and MPLS HQoS, ensuring E2E QoS deployment

Complying with the QoS scheduling model defined in DSL TR-059, the ME60 provides QoS scheduling by using a traffic management (TM) chip. The ME60 can:

Provide 5-level QoS scheduling capability.Support the QoS of the access network, thus avoiding network congestion.Provide QoS scheduling for each terminal and session

The policy is separated from behavior, so the QoS is configured flexibly and deployed conveniently. Moreover, the TM is separated from the packet forwarding engine (PFE), so the QoS processing does not decrease the forwarding speed.The ME60 provides QoS scheduling for the IP and MPLS networks. To meet the QoS demands of IPTV and Metro Ethernet, the ME60 performs traffic classification and congestion management on multicast flows and layer 2 information. Thus the quality of new services can be ensured.

FCC and RET solution improve customers' experience

iVSE is short for integrated Video Value-added Service Enhancement; Fast Channel Change (FCC) and Retransmission (RET) are two function sub-modules of the iVSE module. FCC is used to address the problem of slow switching between IPTV channels. RET is used to address the problem of packet loss. Packet loss in IPTV services may cause problems such as erratic display or even dark screens.

Specification

Specifications

ME60-X16

ME60-X8

ME60-X3

Switching Capacity

25.2 Tbit/s

12.58 Tbit/s

1.08 Tbit/s

Slots

22 slots, including 2 MPUs (1:1 backup), 4 SFUs (3+1 backup), and 16 LPUs

11 slots, including 2 SRUs (1:1 backup), 1 SFUs (2+1 backup), and 8 LPUs

5 slots, including 2 MPUs (1:1 backup) and 3 LPUs

Dimensions (W x D x H)

442 mm x 650 mm x 1,420 mm (32U)

442 mm x 650 mm x 620 mm (14U)

442 mm x 650 mm x 175 mm (DC 4U)
442 mm x 650 mm x 220 mm (AC 5U)

Maximum Power Consumption

4,610W (120G)
7,970W (240G)

2,340W (120G)
4,100W (240G)

1,070W (AC)
920W (DC)

Full Configuration Weight

246 kg (120G)
279 kg (240G)

119 kg (120G)
136 kg (240G)

42 kg (DC)
52 kg (AC)

BRAS

User access protocol: PPPoE, PPPoEoA, IPoE, IPoEoA, and PPPoA 802.1X
User authentication protocol: PAP, CHAP, MSCHAP, RADIUS, and HWTACACS
User accounting protocol: RADIUS, HWTACACS, and COPS
User authorization protocol: RADIUS, HWTACACS, and COPS
Policy protocol: COPS and COA

QoS

Weighted Random Early Detection (WRED), DS-TE capability with a maximum of eight CTs, five-level H-QoS scheduling, VLL/PWE3 QoS, and MPLS H-QoS.
The last mile QoS.
Multicast replication of IPoE access users

DAA

ME60s support Destination Address Accounting (DAA), providing refined subscriber management with differentiated service and accounting in IP networks.