China Outdoor Powder Coating

Outdoor powder coating 1.General introduction:
Outdoor powder coating is a kind of pure polyerter powder coatings. Pure polyester powder coating is made of polyester resin with hydroxyl. It has excellent weather resistance, so usually referred to durable powder coating.
2.Applications:
Pure polyester powder coating can be used for road signs pile , auto industry , transportation equipments , air-conditioned enclosure , armrest ,fences and so on.
3.Product series:

The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.

4.Powder physical properties:

Proportion : 1.2-1.8 (depending on the color and gloss ) .

Particle size distribution: 100% less than 125 microns (more than 85%
between 60 to 90).
Liquidity(180°C):22~35mm.
Curing conditions:200°C,10 minutes.
5.Average coverage:
8-10m³/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).
6.Packing:
Carton packaging, lined with double polyethylene bag, net weight 20 kg.

7.Storage requirements:
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
8.Health and safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.

9.Coating performance

Coating performanceTest itemsInspection standardsTest indicatorsHigh lightGlazed/Matte/Low light Impact resistanceISO6272GB/T1732-199350kg/cm40kg/cmCupping testISO1520GB/T9753-19888mm7mmThe adhesion (grid method)ISO2409GB/T9286-19980BendingISO1519GB/T6742-19862mm3mmPencil HardnessASTMD3363GB/T6739-19961H-2HSalt spray testISO7253GB/T1771-1991>500 hoursDamp heat testISO6270GB/T1740-1979>1000 hoursHeat resistance110°C/24 hours(white)Good gloss retention,E≤0.3-0.4Florida weathering exposureISO2810South 45 °,12monsGloss retention≥50%Artificial accelerated aging60°C/8hours + 50°C/4hours condensing,cycle for 500hoursGloss retention≥50% Color stability:E≤0.35 Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. 2.The above coating performance may be lower as shiny and slightly lower.

10.Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.