China Outdoor Tire Inflator with Water Supply

Main features:

*174PSI/12bar/1200kPa Output pressure

*Fit for almost any size automotive service facility

*Auto-Start Inflation

*Fully Automated, fully programmable, micro-processor controlled conversion system

*Self-diagnostic features

*Suit for: Car, Light Truck, Bus

Technical Parameters:

Dimensions(Height*Width*Depth)

1260mm*360mm*360mm

NetWeight

17.5kg/38.6lbs

GrossWeight

21kg/44.6lbs

PackingSize (Height*width*Depth)

200mm*1290mm*360mm

PowerRequirement

100-240Vac50/60HZ

PowerConsumption

23VA

OperatingTemperature Range

-20ºC/-4ºFto 70ºC /158ºF

MaxInlet Air/ Nitrogen Supply

217PSI/15bar /1500kPa

OperatingRange

5-174PSI/0.3-12bar/35-1200kPa

Accuracy

±1PSI/0.07bar/ 7kPa

Resolution

1PSI/0.1bar /5kPa

Unitsof Measurement

PSI/bar / kPa

Specifications:

1.Auto-Start inflation

2.Automatic zero drift adjustment

3.Remain at last setting

4.Comprehensive diagnostics and error reporting

5.Audible and visual end of the cycle signal indicators

6.Large backlight LCD display

7.Vandal resistant mechanical switches

8.Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air compressor

9.1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

Operation Steps:

1. Set final target pressure using the +and -buttons.The LCD screen will show the target pressure.

2. Connect air hose to tire valve stem

3. Push the "FILL" button once

4. When unit "beeps" and the LCD screen flashes the target pressure, tire inflation is complete

5. Immediately remove hose

about Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.