China Outdoor Use Pure Polyester Transparent Clear Candy Colors Powder Coating

outdoor use pure polyester transparent clear candy colors powder coating

Product detail

Type

Epoxy Powder Coating; Polyester Powder Coating;

Epoxy-Polyester Powder Coating

Instruction

Application Voltage 60-90 KV Gun to Component Distance 15-30CM Curing Temperature 180-200ºC,10 min-15 min

Storage stability

♦Store in ventilated, dry, clean room, temperature < 25ºC

♦Relative humidity 50-65%

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993, AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88,2mm Cross cut, ISO2409

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi

Pass H-2H

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T17740-79(89),1000 hours

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313,500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light

We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae