PC plastic raw material Product Description
Specifications
Polycarbonate Resin (PC plastic raw material) is used on optical storage media, it is:
- High purity
- Low viscosity
- Easy release
Polycarbonate Resin (PC plastic raw material) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high heat resistance, non-toxic, low water absorption and good dielectric properties. Being recognized as the only one with good transparency in the five key engineering plastics (PA, PC, PBT, POM, PPO), polycarbonate occupies the most rapid market growth in recent years.
Product DescriptionPC plastic raw materialProduct GradeInjection and blowing GradeAppearanceNature pellet
ItemTypical CharacteristicTesting StandardDensity 1.2 g/cm3ASTM D-792 Melt Flow Rate 2.5 g/10minASTM D-1238
Molding Shrinkage
(at 3.2mm)5-7 10-3ASTM D-955Water Absorption0.15%ASTM D-570Flexural Modulus 2345MPaASTM D-790Flexural Strength 95MPaASTM D-790
Tensile rate
Break point110%ASTM D-638Tensile Strength
Yield Point Break Point6265 MPaMPaASTM D-638
Notched impact strength
at 23°C747J/mASTM D-256
Heat Deflection Temperature
at 0.45MPa138℃ASTM D-648Vicat Softening Point157℃ASTM D-1525CLTE 6.8x10 1/°CASTM D-831