China PCB Separator Cut Machine PCB Depanelization

PCB Separator Cut Machine PCB Depanelization
Technical parameters:
Power
110V or 220V
Voltage
40W
Cutting thickness
0.5-3.0 mm
Maximum Cutting length
Unlimited
Machine Size
300*230*220 mm
Whole Size
800*370*220 mm
(Feeding plate can be customized)
Weight:
about 36kg
Storage temperature
-20~50ºC
Working temperature
10~35ºC
Blade material
SKD-11 high-speed steel material from Japan
Cutting Materials
aluminum based board, FR-4, glass fibre board and PCB, etc.
Feeding efficiency
2.5 pcs in a minute (1200mm pcb with 10 pcs pcb boards)
Limit:
the distance between the parts on board and the microgroove should be above 1mm; the side width is unlimited
Usage:
Be dedicated to the separating of aluminum based light bar, high efficiency, long life, without deformation and burrs, greatly saving labor and improving company benefits.

Features:
1)The board-cutting is done by 6 blades, and the upside one and the downside one for a cutting unit. So there are Group A, B and C. The whole cutting process is divided into 4 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth after cutting.
2)The cutting process is very stable because of multiple cutting. Even for circuit boards with shallow microgroove.
3)As the low cutting force of the blade, it can prolong the working life of the blades and reduce the cost.
4)Suit for cutting LED aluminum based board, copper substrate, light-emitting tube, light board, display pane, etc. Packing and shipping:
- Good quality packing
- Double check before shipping
- Safely Shipping method,such as DHL /FEDEX/TNT /UPS
- Air Freight, Ocean Freight or cargo forwarder service