China PE FarmlIrrigation Pipe Machine PE Perforated Pipe Extrusion Production Line PE Water Supply Pipe Extruding Machinery

PE HDPE Pipe Extrusion Line Pipes Manufacturing Plant For Water and Gas Supply.
HDPE Gas and Water Pressure Pipe Production Equipment Extruding Line
HDPE Draiange pipe extrusion line.
HDPE/MPP Cable conduit pipe machine.
HDPE thermal insulation jacket pipe production lines.
HDPE pipe pextrusion roduction lines models:
16-63mm, 20-110mm, 75-250mm,110-315mm, 160-450mm, 280-630mm, 315-710mm, 400-800mm, 630-1000, 710-1200mm, 710-1600mm,
1. HDPE/MDPE gas/water supply pipe features:
This Large diameter HDPE/MDPE fuel gas/water supply pipe extrusion line is mainly used for producing large diameter HDPE/MDPE pipe. The pipe has some excellent features such as heating resistant, aging resistant, high mechanical strength, environmental stress cracks resistant, good creep resistant, etc. It is a preferred gas conduit for ductwork systems between city and its suburb, water supply in city.
2. Production line features:
High efficiency extruder is designed for HDPE pipe, equipped with reducer which is high speed and low noise, feeding section with cooling unit and reversing spiral groove, different pitch undulant screw which allows great output, lower melting temperature, and lower energy consumption.
Distributed spiral composite extrusion die-head ensures the melting pressure and flux even and stable, the surface of pipe smooth and glossy.

Extruders: Plastic Single-screw extruders for HDPE/PP, optinal SJ45, SJ55, SJ65,SJ75, SJ90,SJ100,SJ120,SJ150, L/D 33:1 or 38:1.
Extrusion capacity from 40kg/h to 1500kg/h.
When install Gravimetric feeding system, The hdpe pipe meter weight and extrusion output of the pipe are presented in digital form and are visible.Reduce the waste pipe rate, improve the pipe quanlity and greatly save the cost of raw materials.

Extrusion die-head, pipe extrusion mould, vacuum calibrators.
Single layer extrusion mould, double layers extrusion die moudld, three-layers extrusion molds, file-layers conmposite extrusion mould.

Vacuum calibration water tanks, and spray water cooling tank, made of stainless steel ensures precise calibration and fast cooling.

Adopts multi claws haul-off unit: Chipless cutting machine:
speed adjusted by frequency inverter or by servo-motors. Be able to cut large diameter and thick wall pipe, servo-motors,
Haulling speed: 0-30m/minAccurate cutting, no burrs on the cutting section, smooth and beautiful

3. Technical parameters:

ModelPipe Diameters(mm)Supporting extruder
(33:1 or 38:1)Extrusion capacity(kgh)Total Installed Power(kw)SG-6316-63SJ6533 SJ2525120-180110SG-11016-110SJ6533 SJ2525150-200130SG-16050-160SJ7533 SJ2525150-220150SG-25075-250SJ7533 SJ2525280-350280SG-315110-315SJ9033 SJ2525250-350350SG-450160-450SJ9033 SJ2525350-450400SG-630315-630SJ12033 SJ2525550-850550SG-800450-800SJ15033 SJ2525800-1300750SG-1000600-1000SJ15033 SJ2525800-1300750SG-1200800-1200SJ12033*2 SJ2525950-1600950SG-16001000-1600SJ15033*2 SJ25251500-25001300

4. Contact:
Mrs Ekaterina Sun