China PE Feve Coating Polyester Aluminium Sign Sheet for Advertisement

1)Product Name: Aluminium Composite Panel /wood laminate wall panel / aluminum granite color / design of building facade/ aluminum foil / wall cladding / aluminum composite

2) Introduction: metal Composite Panel is sandwich panel that is composed of 2 metal sheets (aluminum, copper, zinc or stainless steel) bonded to a thermal plastic core (or FR core).

3) Characteristic of metal composite panels:

CharacteristicsSuper flatnessHigh panel rigidityLight weightedEconomic costVarious colorsEasy fabrication & InstallationGood Anti-UV propertyGood impact resistance

Specification of BOLLIYA metal Composite Panels:

CoatingPVDF Kynar500 / FEVE / PECoating Thickness:PVDF & FEVE >25microns
PE>15micronsPanel Thickness2mm, 3mm, 4mm, 5mm, 6mm upto 15mmAluminum Skin Thickness0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mmAlloy1100, 3003, 3005, 3105, 5005Panel Width1220mm, 1250mm, 1500mm, 1575mm, 1750mmPanel Length2440mm, 4880mm, 5000mm, 5800mmCoreLDPE core, Mineral Filled FR core

4) BOLLIYA factory at a glance:

Year Established1997Production Lines1 high-speed coating line (runs at 30meter/minute)
2 ACP lamination line (runs at 6meter/minute)Production Capacity8000sq.m of 4mm panel a day (2 containers)Management SystemsISO9001 / ISO14001 / ISO18001Product QualityComplies with CE, ASTM, EN, BS normsProduction RangeAluminum Composite Panel
Copper Composite Panel
Stainless Steel Composite Panel
Titanium-zinc Composite Panel
Aluminum Honeycomb Panel
Sandwich Panels

5) How do we guarantee our product quality?
We have 3 strict quality control procedures to ensure our product quality.
Step 1: We choose top quality raw materials
PVDF paints: PPG and Beckers
Aluminum Coil: Chalco
Copper Coil: Aurubis
Titanium Zinc Coil: Rheinzink
Stainless Steel Coil: NSSC, POSCO, Bao Steel
Step 2: Quality inspection during color coating process, lamination process and packing process
Coating process: Aluminium thickness, color deviation, gloss rate, coating thickness, T-bend, pencil hardness, paint adhesion etc, were fully inspected according to AAMA620 norms.
Lamination process: Peeling Strength, panel thickness, panel width & length, diagonal, panel surface are fully inspected accordingly to ACP industry standard.
Packing and container loading process: Visual quality re-check
Step 3: Third party tests. We cooperate with SGS, TUV, Intertek to conduct quality tests on our product. Below is test results done on our product (done by SGS):

NoTest itemTest methodTest conditionResult1Coating thicknessASTM D7091-05-27.0µm2GlossASTM D523-0860° geometry273Pencil hardnessASTM D3363 -05(2011)Pencil: Mitsubishi®scratch hardness: 2H (see note 1)4BendresistanceASTM D3363 -05(2011) method A-No cracking at the minimum mandrel diameter(3mm)5AdhesionASTM D7091-05e2 method BTape: Permacel 99 Space: 1mmClassification: 5B (see note 2)6ImpactresistanceASTM D2794 -93(2010)Diameter of the punch: 12.7mmImpact model: intrusionImpact failure end point: 1.3kg·m7AbrasionresistanceASTM D968- 05(2010) method ALitres of abrasive: 76.0LCoating thickness: 0.99milAbrasion resistance: 76.8L/mil8WaterresistanceASTM D870-09Immersion, 99ºC,2hAppearance: No visual change9Dirty resistanceASTM D2064 -91(2008)Cheesecloth: 40x40mm4 intact layersNo. 8 rubber stopperlead: 500g condition: 60ºC,1hNumberical value:10 (see note 3)10AlkaliresistanceASTM D1308- 02(2007)clause 7.210 drops of 1%(m/m)NaOH Spot test, 16h (see note 4)Appearance: No visual change11Acid resistance10 drops of 1%(m/m)H2SO4 Spot test, 16h (see note 4)Appearance: No visual change12Oil resistanceEdible oilAppearance: No visual change13Solvent resistanceASTM D5402 -06(2011) method ASolvent: MEK Rub rate: 1cycle/sNumber of double rubs:25cycles (see note 4)Appearance: No visual change14Color retentionAAMA 2605-20057.1Take a random point on the sample as color standardE*ab=0.20 (See note 5)15Adhesion reverse impact1/6" crosshatchWith reference to ASTM D3359-09e2 method B andclient's requirementDiameter pf the punch: 12.7mm impact model: extrusion Space: 1/6inch Tape: Permacel 99Classification: 5B(See note 2)16Coefficient of linear thermal expansionASTM D696-08Test temperature range : Ramp 10ºC/min from -30ºC to 30ºCPurge gas: Nitrogen (N2), Purity 99.995%Flow rate: 50ml/min. Measurement Direction: Thickness193.8x10-6µm/m·ºC (see test spectrum)17DensityASTM D792-08 method BAbsolute alcohol, 23±0.5ºC1.449g/cm318Tensile strengthASTM D638-10Specimen: Type I specimen thickness: 3.95mm Testing speed; 50mm/min61.6MPa19Flexural strengthASTM D790-10 Procedure A and client's requirementSpecimen: 128x13.17x3.96mm Testing speed: 1.7mm/min Span: 64mm128MPa20Flexural modulus11720MPa21Sheer strengthASTM D732-10Specimen thickness: 3.94mm Punch diameter: 25.0mm Separation speed: 1.3mm/min34.2MPa22Shear resistance10594N23180° Peel strengthASTM D903-98(2010)Specimen width: 25mm Testing speed: 152.4mm/min0.95kg/mm24Peel torqueWith reference to ASTM D1781-98(2004) and client's requirementCondition: Dip in 100ºC boilding water, 20min→ 23±2ºC, 50±5%RH, 24h sSpecimen width: 25.0mm Testing speed: 25mm/min14.6kg/mm25Heat deflection temperatureWith reference to ASTM D648-07Method B and client's requirementSpecimen width: 13.52mm Specimen depth:4.05mm Rate of temperature: 120ºC/h Load: 1.82MPA97.3ºC(see note 6)

6) Packing and Loading:

Packing MethodLoading Quantity for 3mmLoading Quantity for 4mmWooden Pallet1500pcs1100pcsIn Bulk (nude packing)2000pcs1400pcs

7) Typical Project List:

ProductNameQuantityAluminumBeijing National Conventional Center100,000 m2Linghai Pearl Building8,000m2Melbourne Airport20,000m2Costa Rica Liberia Airport10,000m2Malaysia Lingbang Plaza30,000m2Guangzhou Asian Steel Centre3,000m2Copper626 1st Avenue Manhattan35,000m2Tongling Museum2,000m2AHQ Army Complex Bangladesh1,500m2Guangxi Tianlong Apartment3,000m2Elegant Residential Apartment France1,000m2Guangzhou Dayi Villa1,000m2Stainless SteelMalaysia Exim Bank3,000m2Palacio de Hierro de Jalisco, Mexico5,000m2R&F Building Guangzhou10,000m2VTB Bank Vietnam35,000m2