China PLC Control Automatic Feeder Four Color Printer Slotter Die Cutter Machine with Stacker

The main technical parameters :

Design speed 180pcs/minWorking speed 100-150pcs/min
Max feeding size1200mmx2450mmMin feeding size320mmx750mmMax printing area1200mmx2300mm
Note:hanging platePrinting plate thickness7.2mmRegistration precision±0.5mmSlotter and die cutter precision±1.5mmMax depth of slotting300mmSlotting width7mmMax glue box edge width50mmCardboard thickness3-12mm
Machine function
1.This machine is composed of paper feeding, printing, slotting, die cutting, vibration and stacking, etc. It can complete the printing, slotting, die cutting, stacking and other processes of three and five layers of corrugated cardboard at one time.
2.The thickness of the wallboard is 50mm, and the internal stress of the intermediate frequency quenching and tempering increases the density, hardness, strength, toughness, and conductivity of the wallboard. Artificial aging treatment, large processing center processing in pairs, high strength and high precision.
3.The main transmission system adopts gear transmission, high-precision gear grinding technology, low noise, enhanced gear strength, and improved gear transmission stability. All transmission gears are made of high-quality steel, high-frequency quenched, tempered, and finely ground, with high strength and durability.
4.Bearings adopt famous brand bearings such as Renben, Harbin, Wafangdian, etc., and are inspected one by one, and they are qualified and put into storage.
5.Each unit is electrically clutched and equipped with an alarm bell, and the alarm will continue to ring during the clutch to ensure the safety of the operators. The clutch motor is equipped with a constant torque clutch, which can buffer the collision of each unit in case of incorrect operation.
6.On-line master lock: The main motor is automatically protected when the equipment is not combined, and automatically stops running when the running signal is obtained.
7.The main motor starts with frequency conversion, and the motor adopts frequency conversion motor. Electric appliances adopt domestic famous brand products.
8.Pneumatic components: Airteck and other famous brand products are used for pneumatic components, and Wuhan Jinchangjiang famous brand products are used for diaphragm pumps.
9.The ink is evenly applied to the machine, and the ink volume is controllable to prevent ink overflow and ensure that the outside of the ink path is clean and sanitary.
10The whole machine adopts closed spray lubrication to keep the gears in a highly lubricated state. Each unit is equipped with a contact flow-type oil level balance mechanism to prevent the lack or overflow of lubricating oil in individual units.
11.The gap adjustment of the whole machine adopts double guards for quick adjustment without wrenches and self-locking mechanism.
12.The whole machine is equipped with a full-process PLC touch control system, and the slotting part contains an order memory function. The order can be automatically changed by entering the length, width and height of the cardboard. After the second production, the stored order can be directly retrieved and fine-tuned. For rapid production.

1.The electric control machine has an alarm bell attached to the clutch, and the bell will continue to ring during travel to ensure the safety of operators.
2.The drive shaft is equipped with a friction clutch to avoid malfunction and damage to the machine.
3.The main motor adopts frequency conversion start, which can increase energy saving by about 30%.
4.Optional: The pressure-free leading edge paper feeding system reduces the damage to the cardboard and improves the load-bearing strength and compressive strength of the carton after it is formed. Compared with the ordinary paper feeding system, the damage to the cardboard is reduced by more than 70%.
5.The main screen is a PLC color touch screen, which displays the phase setting of the printing and die-cutting parts, and can set and display the production quantity. It will automatically alarm when the single alarm is reached.
6.Vacuum suction and paper feeding can effectively overcome the different degrees of bending of the cardboard and ensure smooth paper feeding.
7.Electric adjustment of side baffle, manual linkage adjustment of front baffle gap, electric adjustment of rear baffle position.
8. Separate sheet feeding device (can choose continuous or separate sheet feeding according to needs).
9.The left baffle is equipped with a pneumatic aligning device, which can automatically align one side of the cardboard to improve the accuracy of paper feeding.
10.Optional: Equipped with high-quality brush and upper dust removal system, which can remove a large amount of impurities on the printing surface of the cardboard and improve the printing quality.
11.Optional: The paper feeding part is equipped with a rear-view display, which can be used to observe and grasp the production and personnel conditions at the back of the equipment through a camera, effectively reducing accidents.
12.The upper delivery roller is a seamless steel tube with an outer diameter (155.2mm), wrapped with wear-resistant rubber, and is balanced. The high-quality wear-resistant rubber can improve the compressive strength of the cardboard and reduce the damage to the corrugated cardboard.
13. The lower paper feeding roller is a seamless steel tube with an outer diameter (156mm), and the surface is embossed, and the balance is corrected to improve friction and ensure paper feeding accuracy.

1. Single-roller double-knife grooving, six-axis design, pre-compression and real-pressure split-axis forming, electric adjustment of box height, PLC touch screen data input.
1.Pre-pressing wheel, grinding process, hard chromium plating on the surface, arc-shaped design, first damage corrugated cardboard.
2.The crimping wheel has a circular arc convex and flat pressing design, and the pre-pressed cardboard is well shaped and not easy to break.
3.The adjustment gap between the pressure line and the pre-pressure wheel adopts a self-locking structure, which can be quickly adjusted manually, and the adjustment range is 3-12mm.
4.The main shaft of the pressing and pre-pressing wheel adopts heavy materials after balance correction, which improves the radial operation accuracy and axial strength, and improves the pressing effect on the cardboard. The main shaft is not easily deformed after long-term use.