China PP PE Plastic Film Agglomerator

PP PE Plastic Film Agglomerator
The agglomeration machineis a kind of waste thermoplastic thin films, and wall thickness is less than 2 mm of products can granulated immediately. It can be wastes or thin film of soft polyvinyl chloride (PVC), high and low pressure polyethylene, polypropylene and polystyrene, other thermoplastic plastic on aggregate, also on foaming polystyrene abandoned products for granulation.
1.Used for changing PE, PP film/bags into agglomeration granules.Plastic Agglomerator will be recycling a waste of the plastic film and wall thickness of less than 2 millimeters products direct granulation equipment.
2.It can make granule for soft PVC, high-low pressure polyethylene, polystyrene, thermoplastic polypropylene plastics and other waste products, or the films, also be of granulation for the abandoned polystyrene foam products.
3.The main shaft is metal processed after being heat-treated and adjusted straight and this machine is of low noise but high output, with the removable blade as the fixed blade, resulting in convenient repair and maintenance.
Putting the waste into machine pot body make the material be quickly cut by the high speed rotating turn the blade and the fixed blade shear ,then the material along the pot body wall by the knife dish centrifugal force function ,at the same time, the material turning up and down by paddle and from all around to move towards to the center of the pot body. The friction of material itself and friction of pot wall and blades produce much friction heat under the high speed, making the materials temperature rises to the half-plastic condition and connects to small lump. Before the materials will block, advanced preparation quantitative water will all spray to the material. The cold water touch the hot materials will gasify and take out the surface heat soon , making the surface of the materials cool quickly and avoid blocking, then after crushing effect between rotary blade and fixed blade to cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.
ModelPNAG-100PNAG-200PNAG-300PNAG-500PNAG-600PNAG-800Volum(L)100200300500600800Output(kg/h)100150200300400550Fixed and Rotating Blades QTY2+62+64+84+84+84+8Main Motor(kw)3755759090-110132

Our Service:
1. Our factory provide machine testing when customer come to our factory to see this machine.
2. We provide detail machine technical specification, electric diagram, installation book, operating manual3. We can provide engineers to customer's factory to help installation and training workers if customer required.
4.Spare parts is available when u need.within warranty,we will provide without any charge.Over warranty,we can provide spare parts just with factory cost.We will take response and provide technical support and repair of the whole machine lifetime.