China PPS Body pH Sensor for Aquarium

Technical feature:·Adoption of the most advanced large Teflon diaphragm ,which make the sensor with stable liquid junction.·Adoption of sensitive glass membrane with low impedance effectively eliminate various interferences so as to make the sensor response sensitively.·The reference system is filled with the high polymer,convenient to use, it is unnecessary to refilling KCL solution and it can avoid the pollution on the tested liquid by KCL additive liquid.·The sensor is suitable for the pure water with the conductivity >=1μs/cm. ·The pH range:0~14pH, temperature range: 0~80ºC, pressure resistance of 0.6Mpa and zero point E0=7pH.·Pressure resistance: 0.6MPa and the zero point E0=7pH.·The external dimension of the sensor is φ12x120 ,225,360,450 or other dimensions.

· Direct use with various pH meters as a complete set.
· Installation with 3/4NPT pipe thread.
· The sensor has the fixed cable and the length of the cable can be adjusted according to the requirements of the users.
· pH range:0-14.
· Temperature rang: 0-80ºC.
· pressure range:0.6MPa.
· zero point: E0=7pH.
· The external dimension of the sensor isΦ25x165.
· The outer tube material: PPS plastic.
Selection of model:
· PC2121 combination pH sensor