China PT 2231 Daily Use Phenolic Thermoset Resin for Metallographic Hot Mounting Press

Product Description
Item NoDescriptionBenefitPackagePT-2231Phenolic thermoser resinDaily use. For general fast sample preparation,quick grinding speed,economical and practical. Color:Black,Green,Red ,Grit with powder.1-25KG/PKGBB-2232Phenolic thermoset resin with glass fiberPenolic edge protection.
Edge protection, Provide good edge protection performance,low grinding speed.only black grit1-25KG/PKGTM-2235PowderTranparent
Transparent type white powder colorless, easy to bereleased, very suitable for observing samples 1-25KG/PKGDP-2236Phthalate ResinDAP
Diallyl Phthalate Resin;Edge protection type black grit; Medium grinding speed,good edge protection performance;only Black1-25KG/PKGDC-2239Black gritsGraphite conductivity
Conductivity type black grits containing graphite inside the product,used for SEM detection and analysis,only Black.1-25KG/PKG
Compression mounting is carried out using a mounting press where the sample and the selected mounting media material are inserted in the mounting cylinder. Heat and pressure are simultaneously applied during the mounting cycle of the sample.
The two types of mounting media are available:
There are Thermoplastic and thermosetting powders.
Thermoplastic mounting material remains fluid at elevated molding temperatures and hardens during cooling. This resin can be used for fragile materials. Pressure can be applied when resin is in the molten state. A useful property of the thermoplastic resin is its transparency once cooled. It is much easier to detect the area of interest.
Thermosetting mounting material is wood flour filled with phenolic compound that cures at elevated temperature and pressure. The available thermosetting powders are phenolic, diallyl phthalate and epoxies. The phenolic powder in the form of powders or preforms is the more commonly used. The diallyl phthalate is available with mineral or fiberglass filler. The edge retention of the glass filled is better than phenolic powder. The epoxies provide the best edge retention with low shrinkage. The selection of the type of compression mounting powder to use will depend on the abrasion rate of the media and the sample being mounted. Normally, one would choose a mounting medium with an abrasion rate comparable to that of the sample.

Payment & Shiping
RFQ
1, Min. Order Quantity
1 piece is OK.
2. How about your technical team construction?
We have professional technicians team with 10 years' experience.
3, What's our warranty?
12 months
4, Ways of payment
T/T, L/C, Pay pal, Western Union
5, Ways of shipment
EXW, FOB, DHL, FedEx, or upon your requirements
6, Are you a trader or manufacture?
We are manufacturer, owns our factory in Suzhou.
7, Can you accept OEM or ODM?
Of course,Logo is also acceptable
8, What is the delivery time?
No special requirements, can be delivered within 3 days. For customized models, delivery time shall be discussed and confirmed according to order
Contact