PVC Plate/Sheet/Board Machine Extruder with CE Certified (SJSZ)
MACHINE"S INTRODUCTION:
PVC Board/Plate Extrusion Machine consist of twin screw extruder, vacuum shaping table, haul-off machine, cutting machine and stacker, and also coordinated with different profile break-section and mould to produce PVC Board/Plate, foamed special shaped materials, decoration panel material, profile and multi-hole wire plastic products.
FEATURES OF MACHINE
It has stable plastification, high output, low sheering force, long life service and other advantages. PVC profiles can be used in the building industry and home or office.
EQUIPMENT LIST:
1. Twin Screw Extruder
2. Mould
3. Three Roller Calander
4. Roller Temperature Controller
5. Haul-off Machine
6. Cutting Machine
7. Stacker
As the auxiliary machine, such as mixer, crusher, miller, chiller, will be provided according to client's requirement.
TRADE TERMS: Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptableDelivery Time: 40 days after receipt of prepayment.Packing Method: Packing film or wooden caseGuaranteed Time: 12 months
MACHINE TEST AND AFTER SERVICEWhen machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container. When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable. If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours.