China Paper Slitting Machine for Adhesive Paper Slit Rewind

Paper Slitting Machine for adhesive paper slit and rewind
Funcional characteristics:
This machine is slitting equipment of high precision and high sensitivity,
With inflatable bearing is used for feeding and receiving materials.
imported magnetic powder clutch is adopted to control the tension.
imported gas sensitive device is adopted to detect the rectification of rolling,
With fully automatic hydraulic rectification control. Automatic detection, rectification and metering can be realized.
It is characterized by accurate slitting, fast slitting speed, ease of operation and maintenance, etc.
Purpose:
It is applicable for the laminating and slitting tooling of industrial adhesive tape, cellophane tape, protective film,
Copper foil, aluminum foil, OPP, PE, PVC, sheet, cloth, etc.
This mahcine is widely used in the industries such as printing, packing, electronics, leather, clothes making, plastic, etc.

Model1600 Paper Slitting Machine for adhesive paper slit and rewindMax Feeding Width ( mm )1600Main Engineer Power ( KW )6Speed (T/M )80machine Size ( mm )2400*2300*1300Weight (kg)1500Feeding diameter ( mm )800Rewinding diameter ( mm )450unwind and rewind core dia.76mmprecision ( mm )±0.10Power380V 50HZMin slit width25mm

Design of it :

Machine Name :DP-1600 Paper Slitting Machine for adhesive paper slit and rewind

1. Technique Data

Machine Speed : 110m/min

Max material diameter : 1600mm

Feeding Diameter : 800 mm

Rewinding diameter : 450mm

Slitting accuracy :±0.1mm

Voltage:380V 50HZ

Main Motor Power :5.5kw (2 motor power)

Total Power: 8kw

Raw material Max hole diameter: 3"

compress air source:(0.4-0.6)Mpa(customer-owned)

Finished products Min. Width by standard slitting :25MM

Main Machine size :2400*2300*1300mm

Feeding Machine size : 1950*880*780mm

Weight : 2.2T

2, 1600mm cold laminator Feeding Device

Feeding Air Expansion Shaft (3"Pad Shaft) 2 Sets

magnetic powder brake 100N1 Set

Film release Magnetic Powder Brake 50N 1 Set

Feeding Tension Control System2 Sets

Correction System(Taiwan Gas and Liquid correction)1 set

3, Renewal Material Laminating Part :

Upper Laminating rubber rollerDia.135(PU rubber material) 1 Set

Under Laminating rubber roller Dia.135(PU) 1 Set

Aluminum guide roller(hard Oxygen surface treatment) 1 Set

Pressure roller pneumatic type top and bottom system adjustable : 1 Set

electronic counter1 Set

Film Release tensioning adjustable system

4. Reeling end

Rewinding shafts (3″Pad shaft)1 Sets

magnetic powder clutch 50N 2 Sets

the rewinding tension control system1 Sets

Main electrical machine (double motor)1 Set

Main Power inverter1 Set

Winding shaft and pneumatic up and down device(Rise,descend ,support) 1 Set

5. Operator control box1 Set

6.Electric control panel1 Set

7. Function Profile

frequency control of motor speed, operation more easy. Control more accurate.

Double receiving roller center take up , rewinding

Double receiving magnetic powder tension independent control, can rewinding at the same time , and also can individual use

Electronic meter counter with the function of automaticly count the meter and setting length, automatic stopping ,accuracy 0.01, error ±0.15M

Independent fan waste discharge.

Double motor configuration,The scroll of rewinding can be positive and negative transfer .

8. Slitting part

Slitting up and down cutter 10 sets

Circle tool apron10 sets

Slitting up and down cutter gasket:1/2/5/20/30/50 each 13 pieces,10MM 12pcs