China Parker CNC Control Vertical Glass Cutting Produce Line

CNC Contol Vertical Glass Cutting Produce Line

Features:
1. The machine is designed and developed with Italian engineer, the stability and accuracy has been to the advanced world standard. It is made from full-auto glass loading machine (mechanical), CNC full-auto glass cutting machine and breaking machine, which realized automatic-loading, transmission, allocation, optimizing, cutting and breaking at the same time.
2. The software adopted the most advanced Italian cutting and optimizing software, to guarantee the safety, stability, speed, accuracy and optimizing rate of the machine, easier to operate, widely used for architectural glass, furniture glass, electric glass, kitchen glass, auto glass, hollow glass, solar glass and so on.
3. It can cut 300 different shapes. And also can cut different shapes according your design through the control computer. It can choose the best way to cut the shape automatically. In this way can guarantee the cutting efficiency.
4. Fully automatic lubrication oil system.
5. Glass location adopts optoelectronic scanning. Can repair some error all by itself. It can scan the glass shape then change the CAD design.
6. Optimization software: For cutting size can be sorted in any combination, and output optimal cutting plan, improve the cutting rate. After optimization in software and has two artificial modification function. Effectively improve the cutting efficiency
7. Optimization pressure and speed: In figure, straight line, arc pattern, bending start and bending end; Accelerating, decelerating, and so on. Automatically adjust the most suitable output for pressure and speed.
8. Optimization software directly compatible with cutting software.
9. Self-diagnose system: The important electronic parts, such as the shaft of the motor, encoder, driving card and so on, when they were broken, the software will suggest the damaged parts, rapid interpretation and assist in troubleshooting. When updating motor or drive, the software can automatically be adjusted to match the new member states, to achieve " plug-and-play", easily to be repaired.
9.1Can calculate the production capacity all by itself.
9.2With knife limit protection function.
9.3 With automatic correction function. Ensure the cutting accuracy.
9.4Automatic cutting paths selection, Ensure the optimum cutting speed
9.5 Automatic debugging cutting knife pressure, fast and stability
9.6 Special shapes cutting pressure automatically, can effectively guarantee the cutting effect
9.7The origin of the correcting function. Can set origin two times.
9.8 Special-shaped template scan: With a variety of ( including special-shaped ) templates for point-by-point scanning converted into CAD graphics function

Glass loading section parameters: Voltage:380V/220V50HZPower:9KWAir pressure:0.5-0.8MpaVacuum pressure:-70~90KpaLoading Sheet sizeMin. size:1500*1500mm,
Max. size:2440*3660mmLoading thickness:2~19mmThe fastest loading cycle:30-60sTransfer speed:0~40m/minMax. suction depth:750mmMax. loading weight:900KgUnilateral upper arm volume:Four armsThe number of single arm suckers:ThreeTurning arm:DoubleLoading position:Multi-positionX axis normal moving speed:25m/minY axis normal moving speed:5m/minTable Height:900±50mm

Glass Cutting Section parameters:Voltage:380V/220V50HZPower:9KWAir pressure:0.5-0.8MpaCutting size Max.:3660x2500cmCutting bridge speed:0-150m/minTable Height:900±50mmGlass thickness: 2-25mmCutting accuracy≤±0.20mmCutter head speed:≥160m/minCutter location error:≤±0.15mmCutting operation:Using air pressure and the spring SMC precision digital display module, the cutter head rotate 360 degrees, upper and lower cutter can cut any different glass shapes.Oil injection mode:Automatic oil inject deviceConveying device:Automatic induction of synchronous belt transmission device (It is convenient for glass transmission to achieve the automatic transmission to reduce the manual workload )Glass positioning:The photoelectric scanning positioning system and machine positioning be used togetherPlaten:imported waterproofing/ fireproofingRack/guide rail:Taiwan YYCMain bearing:Japan NSKTransmission belt / belt wheel:Italy BaileyCutter wheel/wheel clamp:Germany BohlePC computer control:Windows interfaceServo system:Japan OmronControlling card:imported from ItalyElectrical parts:Omron and SchneiderMain pneumatic parts:Japan SMC, Taiwan AIRTACCutting and optimization software:OPTIMA Italy

Flotation breaking section parameters: Table specifications:3600x2800mmTable height:900±50mmThe number of fan:2 Sets( Independent Switch Control)Panel:high density fiber boardTable cloth:black fiber felt

Company Information
Founded in 2003, Parker Machinery Co., Ltd has developed an assembly line for door, window, curtain wall and insulating glass equipment.With over ten years' production experience, Parker has become a leading manufacturer of window door machinery in China.The operation of high precision, advancement and specialty ensure that we are able to supply high-quality window and door equipment for customers.
During the past few years, Parker has made great progress and has become well known and outstanding in domestic fairs for window door machinery.With advanced technological equipment, tremendous technical strength and reliable product quality, our window and door equipment has been well received by customers from Russian, Kazakhstan, Vietnam, Iran, etc.We have a perfect sales network and complete service system in China.We are also taking a leading role in setting branch companies abroad.
Our Services
1.One year warranty time, we can repair and replace parts for free in one year.
2.Technical support in 24 hours online, TM, Skype, E-mail, solving the relative questions in time.
3.Life time free maintenance service.
4.Free training course at our factory with professional engineers.
5.We provide the consumable parts at agent price when you need replacement
FAQ
1.Q:Are you a factory or trading company?
A:We are a factory.

2.Q:Where is your factory located?Can I visit there?
Our factory is located in Jinan City, Shandong Province, China, near to Jinan and Qingdao.You are warmly welcomed to visit us!

3.Q:How does your factory do regarding quality control?
We have strict control in testing of raw material, production process and final process.only qualified products can be sent out.And we have passed ISO,CE certificate.

4.Q:What you can do if my machines have problems?
A.We can send you free components to you if your machines are in guarantee time.
B.We can send our engineers to repair your machines

5.Q:If OEM available?
Answer:Yes, as we usually do.

6.Q:What are your company normal payment Terms?
Answer:We accept T/T (30% T/T prepaid before production, 70% T/T prepaid before shipment)