China Pelletizing Machine Granulation Machine Plastic Extruder Machine

HDPE LDPE Film PP Bags Flakes Side Force Feeder Pelletizing production line with Hot Die, with sideforcefeeder on the first extruder This is mainly used for PP PEfilm and rigid or hard crushed materialis also possible.

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency,Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruderMachine detail parameter

Item NO.Item nameQuantity Power 1Side force feeder1 set7.5kw+1.5KW2Φ150/28 single screw extruder1 set110kw3Hydraulic screen changer system1 set2.2kw4Φ150/10 single screw extruder1 set37kw5Hydraulic screen changer system1 set2.2kw6Water-ring pelletizing system1 set2.2kw7Chute1 set---8Centrifugal dryer1set 5kw9Wind transmission and silo1 set4kW10Electrical control box1 set_

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will dSafety Products & Supplies esign the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much moreimpuritywill be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih lSocket & Outlet ong life.

Belt conveyer

Customer can decide to install or not install metal detector on tIntegrated Circuit he belt. metal detector can check the melt, if there is melt the detector will alarm and stop, peope chect out the melt and throw it way, and restart the belt conveyer again.Side force feeder(material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder)

The first stage to the second stage(After side force feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage)Material Go directly into the extruder When we test the machine ,material come out
Water-ring hot cut die(For PP and PE the die is different)
Final Pellets from water-ring hot cutting die
Machine under producting (Cast Al heater, save electricty)
whole line of the machine

ModelScrew diameter(mm)L/DCapacity (kg/h)QL-100/100
SJ-10010026~33100~200SJ-10010012QL-120/120SJ-12012026~33150~300SJ-12012010QL-150/150Power Tools SJ-15015026~33300~450SJ-Resonator 15015010QL-180/180SJ-18018026~33800~1000SJ-180180

10

1. We supply below necessary documents with the machine:

Machine layoutElectricity diagramMachine certificateGeneral manual book/maintenance book

2.We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.3. After one year guarantee, If you need we canprovides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.5. 24Hours service :Cell+86-13915707468