China Permanent Magnetic Drum Separator

Permanent Magnetic Drum Separator CTS/CTN/CTB Series:
---Suitable for iron ore, fly ash of iron power plant separator with large capacity, high recovery rate, especially for iron ore concentrate select.
---The downstream tank (Series of CTS) is applicable to rougher flotation and concentration of ore with size: 6-0 mm.
---The half upstream tank (Series of CTS) is applicable to rougher flotation and concentration of ore with size: O~0.5mm, the granularity of granule is 0.15-0.8mm.
Working principle of Iron Ore Equipment:
When the raw materials flow into the tank body of the wet drum magnetic separator, firstly, the flowing direction of the raw materials is the same as the rotary direction of the magnetic drum, the iron magnetite materials are attracted to the surface of drum. This is the first separation. In the second step, the flushing water below flush the raw materials back for the second separation. This time the flowing direction of the raw materials is opposite to the rotary direction of the magnetic drum. Then along with the rotation of drum, the iron magnetite materials on the surface of drum will finally leave the magnetic field and fall to the ore concentrate box under gravity. Also, the flushing water above helps to flush the iron magnetite into the ore concentrate box. The weak magnetic and non-magnetic materials can not be attracted and will flow to the discharge pipe for tailings.
Permanent Magnetic Drum Separator Series Feature:
--Optimized design
--Scientific magnetic circuit, made of strong magnetic coercive force
--High-remanence permanent magnet
--Safe and reliable.
(Different Gauss can be expected at the drum surface. )
Wet High Intensity Magnetic Separator Specifications:
1. Wet magnetic separator in mining
2.80-150t/h; 4000GS
Magnetic Drum Separator Applications:
For wet separation removing strong magnetic substances, such as magnetite, Ti magnetite, franklinite, pyrrhotite, maghemite, etc. From feebly magnetic minerals and non-magnetic materials.
Three types of tanks:
Half counter-current tank (CTB), direct flow tank (CTS) and counter+ current tank (CTN), which are used according to different granular and technological requirements.
ModelRoller sizeRoller surface magnetic induction indensity (mT)Processing capacityMotor powerRoller rotating speedTotal weight(diameter xlength) (mm)Pole geometric center valueSweeping and separarting area average valueHighest magnetic induction indensityt/hm3/hkwr/minkgCTB-718750x180012015518020~45723352100CTB-918900x180014816519025~55904282900CTB-924900x240014816519035~701104283600CTB-10181050x180014816519040~751205.5224000CTB-10211050x210016024018045~881405.5224500CTB-10241050x240014816519052~1001605.5225000CTB-10301050x300016024028065~1252007.5226200CTB-12181200x180016024024047~901405.5195800CTB-12241200x240014816516582~1201927.5196200CTB-12301200x300014816516580~1502407.5197200CTB-15301500x300018024024090~17027011148900CTB-15401500x4000180240240115~22035011149900