China Pet Bottle OPP Sticker Labeling Machine

Product description:
Rotary type hot melt label sticking machine
Linear OPP Hot melt glue adhesive bottle labeling sticking Machine

Facility nameAutomatic linear hot glue opp label sticking machine Machine modelJL-04B-4PMain motor power 2.2KWMain motor brand Taiwan brandcontrollerSchneiderServo motorSchneider 1.5KWPLC moduleSchneidertransitSICK Schneider PanasonicprogrammerSICKLow pressure electricitySchneiderVoltage 380V±10%Frequency convertor50HZWhole machine powerabout 8KWLabel type Single round body label Applied bottle typeRound bottle ∮40-105mm,height=80-350MMLabel sizeLength 125-325mm,height 20-150mmLabel spray methodRoller coating(label head and end end about each 10mm)Label usage methodRoll labelCapacity 12000b/h (common 500ml bottle type) Compressor air pressure MIN5.0bar MAX8.0barCompressor air consumption quantity0.2M³/minuteWhole machine weightabout 2000kgMachine overall sizeL=3150 W=1570 H=1800

Parameter
Model :JL-04 seriesLabel sticking method: round label sticking
Usage glue type: hot glue
1.1).label cutting knife adjust easy
1.2).vacuum absorb wheel adopt to high hardness material making, add shrink treatment programme to cut label abrasion, avoid statics produce.
1.3).exchange compatible workin can do at 10minute quickly finish.
1.4). Can use manual manipulation precision and convenient to adjust knife plate site.
1.5). Vacuum absorb wheel and label cutting part adopt to abrasion heat special matrial making.
1.6).when change label length, auto adjust button can auto adjust I-MARK position
2. Usage label
label material:OPP(gear type)
label specification: as client requirement
label sticking method: linear type hot glue sticking label
3. Facility description
3.1) adopt to wheel stick label method
3.2) via label roll transport label via label wheel supply,as guid rail to do label sticking operation.
3.3) label via label supply wheel, transit auto test I-MARK
3.4) once sure electrici eye position, modem auto adjust wheel supply operation speed, can no mistake cutting label position.
3.5) label via label supply gear, into cutting part to do cutting operation, then cutting label transport to vacuum absorb plate
3.6) via conveyor belt transport container to wheel gear to do arrange, after glue spray label, to do guid first time label sticking, then rely on in-phase operation to do perfect label sticking operation.
Device description:
1) controlling: operation controling,frequency convertor
2) safe device
drive part set overload operation protection device
supply wheel gear abnormal statics stop device
no bottle supply inspection device


bottle supply overload inspection device

Main fracture
1)conveyor
2) supply star wheel
3) label station
4) vacuum absorb plate
5) drive part
6) hot glue glue supply machine
7) glue roller wheel
8) in phase belt
9) label cutting part
10) label guid rectify
11) machine frame
12) vacuum system and air source treatment
13) controlling system
Compatible part
1) wheel gear and guard board
2) cavcuum absorb plate
3) screw pusher
4) rub bottle guard board

one client local install photos. if need operation video,pls contact us.