China Pet Optical Film Cutting Machine.

<H> MGX-1650 Optical Film Splitter for optical film, OCA, relrase film, PET, OPP, CPP, PVC, paper machine high speed 1600mm(wheel face width 1700mm)<H>
Main Technical parameters Name 1Cutting MaterialPET,OPP,CPP,PVC,OCA. protective film, Release film, Adhesive, Synthetic paper and other coils.2
Raw material width
1650mm(wheel face width 1700mm)3
Maximum unwinding diameter
Φ1200mm (Unwinding Effective Core Width 350mm-1500mm)4
Maximum take-up diameterΦ600 mm5
Minimum slitting width 30 mm - 1350 mm6
Uniformity of cut end face either-or
The precision of using shortcut can reach ±0.2mm
The precision of the Combination cutting can reach ±0.1 mm7
Inside diameter of take-up die3"(76.2mm)8
Mechanical running speed0- 250 M/min(Design speed,speed depend on the material characteristics)9
Power Supply380V 50HZ 3PHASE10
Total machine power 40KW11Air pressure source
50KG (Prepared by customer)
12
Air pressure source
Length 4100 mm* width 2700 mm* height 1700 mm13Machine weight3800 KG (Integrated machine)14Tension control methodAuto-Control
Product features
1.The whole device is user-friendly with the function of 10-inch touch screen man-machine interface, PLC centralized control, the design of switch buttons, adjustment handles, signs, colors, etc.It meets the requirements of ergonomics and national safety and quality inspection standards
2.Unwinding adopts shaftless unwinding: the unwinding mechanism adopts hydraulic shaftless central unwinding, the unwinding arm can be adjusted up and down, left and right, with a maximum load of 1000kg, equipped with a set of 3 "6" taper plug. Even under the condition of full load, the operator can easily complete the winding action by simply operating the key, which greatly reduces the labor intensity, reduces the winding time and improves the production efficiency.
3.Machine Correction using AC ultrasonic system,With ultrasonic detection of material edges and automatic identification of the material.Machine is driven by the AC motor, with sensitive response and accurate tracking.
4.The slip shaft is used for winding up, with two-stage tension and stable winding tension.
the functions of digital display, variable frequency speed regulation, intelligent fixed length shutdown, emergency shutdown, overload protection are all available.
Machine detail feature


Operation principle
Raw materials are rewinding or slitting from the traction main machine to the slitting mechanism.
Main components of the machine
This machine is composed of the rectifying and unwinding mechanism, slitting mechanism, winding mechanism, driving mechanism and electrical control.
Characteristic
The machine is composed of computer control, single ultrasonic tracking and deviation correction system, automatic adjustment of winding tension and linkage motor and mechanical structure. The unwinding tension is controlled by magnetic powder brake and automatic tension. The winder adopts the air expanding shaft, which can automatically rise and fall with the help of automatic air pressure. The frequency converter controls the working speed of the whole machine and is equipped with an automatic meter counting device. The utility model has the advantages of smooth incision, neat end face of winding, convenient for subsequent processing, etc.
Slitting mechanism
The mechanism adopts the high-precision disc disc disc cutter of cemented carbide, with neat cut and long service life. The upper and lower cutter shafts are cut by adjusting the width, and the speed of the upper and lower cutter shafts is matched by gears. Rotate the hand wheel to lower the knife, and rotate the handle to realize automatic knife leaning.
Transmission mechanism
The frequency converter is used to control the operation of the main motor. The speed isconvenient and fast, and the speed adjustment is too soft and stable.
Main electrical appliances
Adopt human-machine interface, PLC centralized control, advanced technology, Human machine interface, display and set the host speed and winding length, set the unwinding and winding tension and taper Centralized electric cabinet control, beautiful and easy to operate. PLC built-in meter counting function, real-time linear speed, meter recording automatic stop function (with deceleration stop function, meter recording basically has no error)

about us
Dongguan city ManRoLan procession machinery Co., Ltd. Our company integrate produce, sales, R&D as one automatic Industry enterprise.
Our company have more than 30 employees, include 5 technicians, 5 senior development engineers.
Our mainly products include: high procession slitting machine, full Automatic Cutting machine, laminating machine, etc.
Also customize personal customize service.
Our products combined with Germany, Sweden, Japan etc.
Country's high procession technology and quality, more prizes from our clients our products widely use in electronic, IT, Packaging, Medicine, Auto, Printing etc industries.
Advantages
1.Strong expansibility, upgrade system or custom personalize design.
2.Modular design, more convenience and powerful.
3.Machine parts characters, use the high quality raw material, long using lifetime and high stability.
4.Machine process, according international standard process. Quenching tempering internal, external procession grinding.
5.CNC, wine cutting, milling, drilling, ensured each part procession And durable.



Q&A
1.Q: Can you accept OEM or ODM?
A: Yes, you just need to send us your design, we will offer our best quotation within 24 hours.
2.Q: Do you provide samples? Is it for free?
A: Existing Sample for free, can deliver immediately. Customized sample need sample charge, will be completed within 3-7days. Freight cost will be at your side.
3.Q: Can you do the design for us?
A: Yes, We have a professional team having rich experience in designing paper products.
4.Q: What kind of artwork file format I should provide you for printing?
A: PDF,AI,CDR,PSD,Adobe,Core ID raw, etc.
5.Q: How can you ensure the quality inspection?
A: On the order process,we have inspection standard before delivery and will supply you the pictures.
6.Q: Lead time?
A:within 20days
Our service
Sample service:
-We provide free samples for our existing products range.
-Sample and tooling charges need if special design needed, the exact charges depends on your final design and product.
-We will return sample charges to you once place an order, and return the tooling charges once the order quantity reach to certain quantity.
-It will take 2-3days for free samples.
Customized services:
-We provide OEM and ODM process Service, also Provide product sketch.
After-sale services:
-For most of our products, we provide one year warranty.
If any items broken for unartificialreason, we can replace the items after having the approve.
We guarantee your satisfaction with all our merchandise.
We will constantly pay attention to customer feedback and solve the problems timely.
Patent& Honor