China Petroleum Products Kinematic Viscosity Tester Viscometer

Item: Petroleum Products Kinematic Viscosity Tester/ Viscometer
Model: PT-SYD-265H
Summary:
This instrument is designed and made as per the industry standard of People's Republic of China SY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester, GB/T 265 Petroleum Products-Determination of kinematic viscosity and calculation of dynamic viscosity and ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids. It is suitable to determine kinematic viscosity of liquid petroleum products (Newtonian fluids) by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature.

I. Main technical features
1. Single chip microcomputer and colored LCD technology. High intelligence and automation.
2. Intelligent signal sampling, data measuring, parameters operating, and result output. All the operations are finished automatically. English man-machine conversation interface. Easy to operate.
3. The instrument is equipped with timing function. It can choose valid flowing time period and calculate arithmetic average automatically. It can also preset the viscosity coefficient, calculate the viscosity after the test and print the test results automatically.
4. It can do one test alone or doing two tests at one time by setting the parameters. High efficiency.
5. It has the parameters saving function. The instrument will automatically save the parameters of capillary tube diameter, coefficient and so on after these parameters being setted. When doing test with the same capillary, no need to set these parameters again.
6. It adopts desktop and all-in-one machine design. Convenient to use.

II. Main technical specifications
1. Power supply: AC(220±10%)V, 50Hz
2. Heating power:1700W
3. Temperature range: Ambient to 100.0ºC
4. Temperature control accuracy: ±0.01ºC
5. Bath capacity:20L
6. Timing range: 0.0s~9999.9s
7. Timing accuracy: ±0.05% within 60min
8. Amount of capillary viscometer tubes: 4 capillary viscometers
9. Stirring motor: 6 W, 1200 RPM
10.Working condition: (Ambient temperature-10)ºC~35ºC, RH: ≤85%
11.Temperature sensor: RTD, Pt100
12.Maximum power consumption: 1800W
13.Capillary viscometers tubes (Pinkevitch viscometer): 7 pieces in total. The inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
14.Dimension: 530mmx400mmx670mm

Accessories
PT-SYD-265H Intelligent Kinematic Viscometer Accessories and documents List

No. Name Unit Qty Memo 1PT-SYD-265H Intelligent Kinematic ViscometerSet1 2Capillary viscometer (7 pieces/group) (Pinkevitch Viscometer,
Cannon-Fenske Routine Viscometer, Standard Ubbelohde Viscometer)Group1Capillary characteristic, specification, quantity will be confirmed in contract3Silical gen stopper (3#)Piece1 4Capillary clampPiece4 5Rubber tube Φ10Meter0.5 6Mercury thermometer (0~50ºC.50~100ºC, scale divisions of them are both 0.1 ºC; Standard Grade II thermometer) PieceEach 1 7CoverPiece4 8Stopping ring for thermometer (1#)Piece2 9Fuse 15A (Ф5x20)Piece2 10Ear washing bulbPiece1 11Operation manualPiece1 12Quality certificatePiece1 13Product warranty cardPiece1

No. Name Specification Quantity Memo 1Glycerol or mineral oils 20Lthe test temperature above 80ºC 2Petroleum ether 60-90ºC Analytical pure 500ml1 bottle 3Distilled water3 gradesSome

Notes:
1.The reagent and equipment for installing the instrument are supplied by end-users themselves.
2.The usage, management and saving of poisonous and harmful reagent, pls operate according to the relative principle.
3.PLS read the operation manual and industry standard before using the instrument.
Petroleum & Oil Analyzer Petroleum Testing Instruments

· Open Cup Flash Point Tester

· Flash & Fire Point Tester for Petroleum Products

· Closed Cup Flash Point Tester

· Engler Viscometer

· Water Content Tester

· Rotational Viscometer

· Kinematics Viscometer

· Distillation Tester

· Density Tester Rust and Corrosion Tester

· Sulphur Content Tester

· Acid and Alkali Tester

· Dropping Point Tester

· Demulsibility Characteristics Tester

· Ash Content Tester

· Aniline Point Tester

· Low Temperature Tester

· Residue Carbon Tester

· Existent Gum Tester

· Vapor Pressure Tester

· Petroleum Products Vapor Pressure Tester(Reid Methods)

· Bomb Calorimeter

· OCTANE & CETANE ANALYZER

· Lubricating Grease Steel Sieve Oil Separation Tester
Lubricating Oils Foaming Characteristics Tester
Naphthalene Crystallizing Point Tester
Petroleum Products Color Tester
Mechanical Impurity Tester (Weight method)
Crude Petroleum and Petroleum Products Salt Content Tester
Petroleum Wax Oil Content Tester
Automatic Interfacial Tension Tester
Automatic Multifunctional Degassing Oscillation Tester
Insulating Oil Breakdown Voltage Tester
Insulating Oil Volume Resistivity Tester
Liquid Petroleum Products Hydrocarbon Tester
Lubricating Oil Air Release Value Tester
Self-ignition Point Tester
Insulation oil proof pressure tester
Precision adsorption column cleanser
Fluorescent Indicator Absorption Apparatus
dean stark apparatus(water content)(single tube)
dean stark apparatus(water content)(double tube)
Petroleum Products and additives Mechanical impurities tester
Petroleum Products Saybolt color tester(Saybolt colorimetric method)
Engine coolant Foam characteristic tester (glassware Method )
Jet fuel Solid particulate pollutant tester
Apparatus for water separability of petroleum oils
apparatus for Rusting Characteristics of Oils
Lubricating Grease Pressure Oil Separating Tester
Cone and Needle Penetration for petroleum products
Oil Separation Apparatus for grease