China Photoelectric Sensor-Ben Series Ben5m or 10m

Electric Parts - Photoelectric Sensor BEN Series

Type

Free power, Relay contact output

Through-beam

Retroreflective

Model

BEN10M-TFR

BEN5M-MFR

Sensing distance

10m

0.1 to 5m

Sensing target

Opaque materials of min.ø16mm

Opaque materials of min.ø60mm

Respinse time

Max.20ms

Power supply

24-240VAC~±10% 50/60Hz, 24-240VDC≡±10% (ripple P-P:max.10%)

Power consunmption

Max. 4VA

Light source

Infrared LED (850nm)

Sensitivity adjustment

-

Sensitivity adjuster

Operation mode

Selectable Light ON or Dark ON by switch

Relay lifetime

Mechanically:Min.50,000,000 operation, Electrically: Min.100,000 operation

Control output

Relay contact output

Relay contact capacity: 30VDC 3A of resistive load, 250VAC~3A of resistive load

Relat contact composition:1c

Relay lifetime

Mechanically:Min.50,000,000 operation, Electrically: Min.100,000 operation

Light receiving element

Photo IC

Indication

Operation indicator: red, stable indicator: green

Insulation resistance

Over 20MΩ (at 500VDC megger)

Noise immunity

±1000V the square wave noise(pulse width:1μs)by the noise simulator

Dielectric strength

1000VAC 50/60Hz for 1 minute

Environment

Ambient illuminaton

Sunlight: max.11,000lx, incandescent lamp: max.3,000lx(receiver illumination)

Ambient temperature

-20 to 65ºC, storage: -25 to 70ºC

Ambient humidity

35 to 85%RH, storage: 35 to 85%RH

Protection structure

IP50(IEC standard)

Material

Case, case cover: heat resistant ABS Sensing part: PC(with polarizing filter PMMA)

Cable

ø5.0mm, 5-wire, length: 2m(emitter of through-beam type: ø5.0mm, 2-wire, length: 2m)

(AWG22, core diameter: 0.08mm, number of cores: 60, insulator diameter: ø1.25mm)

Accessory

Individual

-

Reflector(MS-2)

Common

Adjustment screwdriver, mounting bracket,

M4 bolt: 4, M4 nut: 4

Adjustment screwdriver, mounting bracket,

M4 bolt: 2, M4 nut: 2

Unit weight

Approx.354g

Approx.208g