China Pipe Compenents Pipe Connections Kf Qucik Flange

Sanitary 304 Stainless Steel pipe Fittings ISO butt-weld cross
Vacuum components are important parts of vacuum technology. These are all components of vacuum equipment which are necessary for the assembly of vacuum lines, e. g. flanges, seals and tube components (elbows, tees, crosses etc.). Applications in vacuum technology make high demands on the selection of material as well as the fabrication of these components.1.Product FeatureThese KFto KF Tee vacuum fittings follow ISO-KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges .The centering ring contains a rubber elastomer o-ring. TLCD Module he standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizLifting Equipment es NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel.High vacuum rated to 1x10-8 Torr
Temperature rated to 200ºC maximum
Symmetric, nonrotatable geometries
Rotatable Bolt Rings available for LF sizes
Viton O-rings
Standard matte finish
NW16 through NW50 sizes
Body type dependent on tube size
SpecificationsMaterialFlanges304 Stainless SteelTubing304 Stainless SteelFinishStandard matte FinishVacuumRange1x10-8TorrFittings Leak Test2x10-10cc/sec of HeTemperature RangeVitonMinimum: -20ºC
Intermittent: 200ºC
Sustained: 150ºCSiliconeMinimum: -50ºC
Intermittent: 200ºC
Sustained: 150ºC
KF Flange SizePlastic Machinery A(inch)B(inch)KF161.51"3.02''KF252.02"4.05''KF402.40"4.80''KF503.15"Wheel & Caster 6.30''
2.Manufacturing and packing process
portShanghai Port or Ningbo Port, Chinamin order Qty.1 pieceSupply ability5,000 pieces/monthPayment termsT/T, Western Union, Paypal, L/CPackagingShrink Wrap-Carton Case-Exporting Plywood CaseDelivery timeDepends on quantityShipping modeBy sea, by air, by express
Wenzhou Hongtai Fluid Equipment Co., Ltd is acomprehensive and professional manufacturer, being integrating in designing, developing, manufacturing.We specialize in sanitary valves, pipe fittings and pumps, which is applied for milk, food, beer, pharmaceutical and other fields.
We can quote you favourable price,high quality&best after-sale services.Welcome to visit our factory.3.The following are other products that we also supply:Sanitary ValvesSanitary Butterfly ValvesSanitary Check ValvesSanitary Ball ValvesSanitary Reversal ValvesSanitary Diaphragm ValvesSanitary Sample ValvesSanitary Safety ValvesSanitary Control ValvesSanitary Relief Pressure ValvesSanitary Pipe FittingsSanitary ElbowSanitary TeeSanitary ReducerSanitary CrossSanitary Triclamp FerruleTriclampHigh pressure triclampTriclamp spoolRound lidsFilter reducer with MNPT portRound lid with FNPT portHemispherical lidsFilter stackSanitary CapSanitary Pipe HangerSanitary Tank Cleaning BallSanitary Hose JointSanitary UnionsSanitary Sight GlassSanitary StrainerSanitary ManholeSanitary Round Manholewithout PressureSanitary Round Manholewith PressureSanitary Square ManholeSanitary Oval ManholeSanitary PumpsSanitary Centrifugal PumpSanitary Lobe PumpSanitary Self Priming PumpSanitary TanksStorage TankFermentation TankMixing TankWarm-keeping TankSanitary TubeSeamless TubeWeldless TubeSanitary GasketSilicone/EPDM/PTEF/VITON Gasket for TriclampSilicone/EPDM/PTEF/VITON Gasket for UnionSilicone/EPDM/PTEF/VITON Gasket for Butterfly ValveSilicone/EPDM/PTEF/VITON Gasket for Manhole Cover
FAQ

Without doubt, We are amanufacturing factory.
Yes,because FDA is abasic and very important certificate for the food processing machines.
Quality control is very important to avoid material mixing and poor quality. We control the quality from beginning to the end. We only have 304 and 316L two different materials. 100% inspection on raw materials. And during the production, different materials in different places. After materials are finished, we choose 10%for
inspection. If there is 0.1% problem in 10%, then no excuse to go ahead for inspecting 100% of the materials.
This is first concerning for customers. We take our materials to our laboratory for each lot. You may ask for the
laboratory report any time.
We are very proud that we never let one customer leave us. Military Apparel We are not 100% perfect,and there are somequality problems. But We try our best to provide the correct materials in the beginning ,so that we takelesstime for quality problems.
If there is any quality problem, we take the responsibility. We believe what we are doing together,it will get backtomorrow. If we always take our responsibility, we keep our customers with us. If not, customers will leave us.
For normal products in 10-15 days; for bulk order, in 25-30 days. It depends.
3 years warranty for all of our stainless steel products. Gaskets are not included due to the different application for customers.More questions are also appreciated.Mobil: 0086-13626538003
Tel.: 0086-577-86812651