China Pipe Thread Lathe Oil Country Lathe

Pipe Thread Lathe, Oil Country Lathe

PART 1---Product Description
Features:
This lathe meets the special requirements of users in the petroleum, geological, mining and chemical industries, and in agricultural irrigation and drainage, it is able to cut various straight and taper pipe threads of union joints, drill rods, casting pipes, drain pipes, well castings and water pump pipes more economically and efficiently as compared with the engine lathe, however, it may serve as an engine lathe to cut various metric, with worth and module threads, shafts and disks.
1. The machine is equipped with a tapering unit which can work out a ±1:4 taper.
2. The machine is able to cut both metric and with threads without changing the translating gear.
3. The dripping worm in the apron can protect the mechanisms of the lathe automatically.
4. The guide way is hardened and finely finished.
5. The great power of the machine is competent at heavy load and power cutting.
6. The floor center rest can be moved freely as required by the user.
7. The center rest is provided with an adjustable clamp unit for long pipes, greatly reducing intensity of
labor.
8. The double 4-jaw chucks offer free clamp of both short and long pipes.
Paraneter:
SpecificationUnitQ-280SQ-360SQ-460SDiameter of spindle boremm280360460Max. Swing over bedmm100010001250Max. Swing over tool postmm700640890Max. workpiece length between two centersmm1500/2000/3000/4000/5000/6000/7000/8000/9000Max. turning lengthmm1300/1800/2800/3800/4800/5800/6800/7800/8800Max. load capacity between two centerskg400060006000Width of bedmm600750970Spindle speed stepstep888Spindle speed ranger.p.m5-3156.3-3156.3-315Main motor powerkwAC 18.5AC 22AC 30Number and range of Metric threadmm44kinds, 1-120Number and range of Inch threadT.P.I37kinds, 30-11/8Number and range of Module threadmm46kinds, 0.5-60Number and range of Pitch threadD.P46kinds, 0.5-60Tool post station
Vertical 4-stationTool section ( HxW )mm32x3245x4545x45Diameter of tailstock sleevemm120160160Tailstock taper
Morse No.6Metric No.80Metric No.80Travel of tailstockmm300Rapid motor powerkw1.5Coolant pumpkw0.15
Standard Accessories:
4 jaw big hole chuck (front and rear), Strady rest, follow rest, Taper turning attachment, Oil gun, Coolant system, Work light, General tools, Foundation bolts, Operation manual (English edition)
Optional Accessories:
2-axes digital readout system (D.R.O), Thread chasing dial, Out board support