China Plasma Cutter CNC Plasma Plasma Cutting

EquiShaft pment Features:1.The design of the whole machine is reasonable, convenient and easy to operate. The end frame body is driven by four rollers, and the center of gravity is stable, ensuring good dynamic balance. All welded parts are treated by integral annealing and stress relief, which effectively prevents structural deformation.
2.The vertical and horizontal transmission adopts high-precision rack and pinion meshing, coupled with the imported precision planetary gearbox for deceleration, featuring high output torque, low noise and long life lubrication, thus achieving high precision positioning transmission. Precision grade grinding, hard tooth surface (carburizing quenching) shaft gear. The transmission mechanism is a life-span mechanism.
3. The mechanical transmission system adopts the precision rolling bearing and the precision of the gear and the rack with the machining precision of the national standard. The drive system adopts imported Taiwan Zhongda reducer, and its input and output error is only 16 arc minutes. At the same time, in the horizontal and vertical gear transmission structure, the device for automatically compensating the gap is added, so that the transmission structure can accurately execute the CNC system. instruction.
The Main Technologyparameter:
No.Itemparameter1Effective cutting range(mm)9000mm2Diameter cutting range(mm)Ф60mm~Ф500mm3Input voltage220±10%V AC 50HZ/60HZ 220W4The powerabout 1000W5Rated rotate speed0-15rpm(can be customized)6Reset accuracy±0.2mm/m7Ovality of the pipe≤2%8Working accuracy±0.2mm/m9The axles number6axle 5linkage10The size of the chuck500#11The lifting range400mm12The max pipe weight1500KG13Plasma cutting thicknessAccording to the power supply14The gas for the flameoxygen+ethyne/oxygen+propane15The thickness of the tube wall for flame cutting5mm~50mm(choose)16Gas prssure≤0.08MP17Oxygen pressure≤1.0MP18Cutting tableWe supply the drawing for client to makeWorking Conditions:
No.content1Power supply capacity: no less than 40KVA2Power sUniversal Medical Implement upply request:
(1)3x380v±10%/50Hz,220v±10%/50Hz
(2) Three-phase voltage stability is less than ± 5%
Three-phase power imbalance is less than 2.5%
(3) It is recommended to use a regulated power supply if the above power requirements are not met.
Note: The power supply voltage is not allowed to jump and suddenly power off, otherwise it will cause damage to the equipment and numerical control system and plasma power supply; it should have good grounding (grounding resistance is less than 10 ohms).3Plasma power working gas and auxiliary gas for cutting:
Working gas: air oxygen4Cutting pipe: smooth, flat, uniform rolling, elliptical deviation ≤ 1%, to achieve ISO standards.5CNC cutting machine installed airport and environment requirements:
(1) Temperature requirement: -10-50 ° C (2) Humidity requirement: <90% without condensation
(3) The site should fully meet the equipment placement requirements. It is recommended to isolate the plasma power supply to avoid interference from the plasma power supply to the system. 6Equipment operators should have a high school or tecShopping Bags hnical secondary school level, and should have experience in operating computers and general CNC machine tools; equipment should be equipped with a programming computer.
Package: