China Plastic Factory Robot Arm Automatic Robot for Plastic Take-out

Plastic factory robot arm automatic robot for plastic take-out
IV-800ID5 Five Axis Full Servo Robot Arm
1.This robot arm is generally applied to 100-250T injection machine.
2.Single Cross arm structure.
3.The robotic arm is adopted with a new type microcomputer controller.
4.imported pneumatic components of the robotic arm are durable.
5.The pull arm and take -out arm are made of high strength aluminum profiles,matched with precision linear guide way, with light weight, good rigidity, low friction and long life span.
6.The use of multiple servo motors in this robot arm makes the arm movement more flexible, and several servo motors can be linked, which greatly shorten the take-out cycle and the full cycle.
7. Each axis is driven by a servo motor, running smoothly, positioning accurately, and can be automatically installed and ranked.
Structure OF Plastic factory robot arm automatic robot for plastic take-out
Parameters Of Five Axis Full Servo Robot Arm
Type IV-800ID5Suitable Injection Machine 100-250TLifting Distance 800mmTaking Out Time 0.8 sBack and Forth Distance 750mmCycle Time 5 sHorizontal Distance1400mm Working Pressure5kgf/cm²0.4MpaMaximum Taking Weight 8KGMaximum Working Pressure8 kgf/cm²0.78MpaMachine Weight 250KGPowerAC220V±10V50Hz
Accessories of Plastic factory robot arm automatic robot for plastic take-out
Safe Electric Box
All lines are put in a box which ensure the safety and lifespan of the lines,also the alert light monitoring the situation of the machine.

Photos of Robotic Arms in Factory

How To Choose Suitable Manipulator robot arm?
1.How to choose the corresponding manipulator according to the model of injection molding machine?
Choose Single cross manipulator robot arm for injection molding machines with a clamping force below 300 tons.
Choose Double cross manipulator robot arm for injection molding machines with a clamping force above 300 tons.
2.How to choose single robot arm or double robot arm manipulator?
The injection machine with two moulds that only need robotic arm to take materials nozzle please choose single arm manipulator.
The injection machine with three moulds that need two robotic arms to take out products and nozzle at the same time,please choose double arm manipulator.
3.What is the manipulator requirement for the height of plants ?
Single section robot arm, the distance from the mould to the ceiling or the bottom of the crane requires a space of 1.5 meters.
Double section robot arm,the distance from the mould to the ceiling or the bottom of the crane requires a space of 1.4-1.6 meters.
INVENT HONOR

Robot Arm Professional Packing


INVENT Service