China Plastic Shredder Blow Molding Machine

This shredder can shred the HDPE wasting material into small pieces.And it can save a lot of labour.
Hopper
Special designed hopper to avoid material flying out. The machine is fitted with
a large filling hopper and can be loaded by conveyor belt, fork lift, crane or
wheel-loader. This funnel can be adapted to suit individual requirements and
guarantees a continuous and economical supply of material without any need
for manual assistance.
Hydraulic ram
The hydraulically operated pusher feeds the material to be shredded
automatically into the rotor's cutting chamber by load-related controls. The
hydraulic system is equipped with high-pressure valves and volumetric flow
controls, which can be both set according to the demands of the input
materials. Add pump water-cooling system.
Rotor
The profiled rotor made of full solid steel has a diameter of 270mm and
operates at a speed of 74rpm. The concave ground, aggressive and 4-way
rotating knives are mounted in the grooves of the profiled rotor with special
knife holders. This enables a reduction of the cutting gap between the counter
knives and the rotor and guarantees a high flow rate, low power consumption
and maximum output of ground material.

ITEMYKS800A(mm)2770B(mm)1670C(mm)1300D(mm)800E(mm)855H(mm)2200Stroke of oil cylinder(mm)850Rotor diameter(mm)φ400Speed of main shaft(r/min)83Mesh size(mm)60Quantity of moving blade38Quantity of fixed blade2Power of main motor(KW)37Power of hydraulic(KW)3Weight(KG)3180